Home |
Search |
Today's Posts |
#4
![]()
posted to rec.boats.cruising,rec.boats.building,sci.engr.mech
|
|||
|
|||
![]()
Dear Larry:
"Larry" wrote in message ... dlzc wrote in news:1190415672.506271.93890 @k79g2000hse.googlegroups.com: There are ship-board distiller units that use an engine to pull a vacuum, and the engine's waste heat to boil that water, to generate drinking water. A little shorter... http://en.wikipedia.org/wiki/Boiling_point "The boiling point of water is 100 0C (212 0F) at standard pressure. On top of Mount Everest the pressure is about 260 mbar (26 kPa) so the boiling point of water is 69 0C. (156.2 0F)." AT 40' ASL, the boiling point must be down to...to....211.95F! What Brian left to the reader's imagination, is that the head space of the tubes is at a near perfect vacuum, flooded only with water vapor. You might recall that a perfect vacuum will lift a column of water about 32 feet, on a high pressure day. Or had you not figured that out? David A. Smith |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Internal Fiberglass potable water tank repair | Boat Building | |||
Salt Water/Fresh Water | General | |||
Is 5200 or Sikaflex ok in potable water tanks | Cruising | |||
Is 5200 or Sikaflex ok in potable water tanks - YES | Boat Building | |||
Fresh-water flushing a raw water system? | Cruising |