Home |
Search |
Today's Posts |
#1
posted to rec.boats.building
|
|||
|
|||
headlinig
could any could suggest any good glues to put up heading batons' up in boat.
iv heard sikoflex 292 is good is there any one could confirm this please or suggest something else.how many screws are needed per foot and is 5mm ply ok or must it be marine ply or could I go thinner |
#2
posted to rec.boats.building
|
|||
|
|||
headlinig
All the high dollar builders are now using 3M industrial plastic Velcro. It
is much stronger than the fabric type and does not fray. It withstands multiple installation/deinstallation cycles and gives the owner the opportunity for removal and reinstallation for maintenance or leak detection and repair. Removal is enabled by using a false floor suction cup on the installed panel. Steve "colinmoore" wrote in message ... could any could suggest any good glues to put up heading batons' up in boat. iv heard sikoflex 292 is good is there any one could confirm this please or suggest something else.how many screws are needed per foot and is 5mm ply ok or must it be marine ply or could I go thinner |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|