LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #6   Report Post  
posted to rec.boats.building
external usenet poster
 
First recorded activity by BoatBanter: Jan 2007
Posts: 25
Default Spraying Imron-Other painting issues




Jim--

I do apologize if I seemed ungrateful for your counsel. I thought you
were just some wise ass. I should have checked things out. I have
just read a lot of your posts and realize that you have made many,
many valuable contributions to this group.

You are absolutely right about the dangers of anything containing
isocyanates. I do not have a supplied-air system but I will probably
be using an HVLP gun which will reduce the overspray and atomozation.
I will be working outside and will be shooting less than one pint. I
will use a tight-fitting mask and the correct cartridge--the same one
I use with muriatic acid which can really burn your lungs up. If I
were younger I would probably not do it without supplied air but at my
age I don't have to worry too much about long-term affects.

Thanks and sorry if I misunderstood your intent.

Joe


On Wed, 18 Apr 2007 19:20:40 -0400, "Jim Conlin"
wrote:

The linear polyurethane (LPU) paints such as Imron, Awlgrip and Perfection
contain cyanide compounds which are VERY TOXIC. These compounds cause brain,
liver and lung damage. When the paints are rolled or brushed, the nasty
stuff stays on the boat and only solvents get into the air. An organic
vapor respirator can deal with that. When the PAINTS are sprayed, an
aerosol of paint droplets, containing the nasty cyanide compounds, is in the
air. The only breathing apparatus which effectively protects the painter
are the 'supplied air' respirators. These start at about $1K. An ordinary
respirator won't do it.. DO NOT SPRAY LPU PAINTS WITHOUT ONE.

 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Looking at a 1994 Zodiac boat -- potential transom/glue issues? JJ_Braddock General 2 April 8th 07 11:06 PM
Brush painting technique YSTay Boat Building 0 March 26th 06 01:22 PM
Painting with Two-Pack Boat Building 12 August 26th 03 11:43 PM
car top hull issues zak Touring 4 August 8th 03 12:09 AM


All times are GMT +1. The time now is 12:12 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017