Home |
Search |
Today's Posts |
#7
![]()
posted to rec.boats.building
|
|||
|
|||
![]()
"dadiOH" writes:
max camirand wrote: Hi group, If one were to sheath an unstayed, solid (grown) wooden mast with unidirectional fibreglass and epoxy (painted over for UV protection), would the sheathing eventually embrittle and fail? I'm thinking that an unstayed mast goes through far more flexion cycles and flexes much further than a stayed mast. Thoughts? Fiberglass and whatever over solid wood is not good. Really? Built 1985-6: http://hem.bredband.net/b262106/Boat/build.html Sailing 2006: http://hem.bredband.net/b262106/Boat/video.html -- Martin Schöön "Problems worthy of attack show their worth by hitting back." Piet Hein |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Thinning Epoxy | Boat Building | |||
Remove or Not Remove Partially Cured Epoxy? | Boat Building | |||
Epoxy or Polyester for Fixing Rotten Core on Deck? | Boat Building | |||
nu2 woodworking - my epoxied wood is delaminating,.. | Boat Building | |||
The Epoxy Test Results | Cruising |