Remember Me?
Menu
Home
Search
Today's Posts
Home
Search
Today's Posts
BoatBanter.com
»
rec.boats
»
Boat Building
>
Hand Crank for Yanmar 2GMF?
Reply
LinkBack
Thread Tools
Search this Thread
Display Modes
#
1
posted to rec.boats.building,rec.boats.cruising
Lauri Tarkkonen
external usenet poster
First recorded activity by BoatBanter: Aug 2006
Posts: 82
Hand Crank for Yanmar 2GMF?
In .com
writes:
Hi,
does anyone know where I could find a
hand crank for a yanmar 2GMF?
The manual describes how to manually start it,
but makes no mention of where to get the
crank/handle to do so.
Thanks!
Does this F stand for Fresh water cooling? If it does, you do not hand
crank it. I have had a Yanmar 2GM with seawater cooling, the handle came
with the engine and in front of the engine there was a small flywheel,
that acted as the sheave for the alternator belt. The axis of this
flywheel could be connected to the shaft.
It was quite difficult to get it going, you had to open the half
pressure walves rotate it and then suddenly close them, first the one
then the other.
Then I changed my engine to a new freshwater cooled engine and the same
belt that was driving the alternator drove the swee****er circuit and it
placed so, that you could not fit the crankshaft. So the end of the axis
was covered with a lid, bolted on by three bolts. So no cranking.
If you have to start it with very little current, opent the half
pressure walves, then your batteries might just be strong enough to
rotate the engine and when it rotates close the valves.
Then you bette to make another starting switch into the "engine room".
Short cables and you will find out that you have enough current even
though it will not start from the key in the cockpit.
- Lauri Tarkkonen
Reply With Quote
Reply
Thread Tools
Search this Thread
Show Printable Version
Search this Thread
:
Advanced Search
Display Modes
Switch to Linear Mode
Hybrid Mode
Switch to Threaded Mode
Posting Rules
Smilies
are
On
[IMG]
code is
Off
HTML code is
Off
Trackbacks
are
On
Pingbacks
are
On
Refbacks
are
On
All times are GMT +1. The time now is
06:52 PM
.
Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
Contact Us
BoatBanter Home
Privacy Statement
Copyright © 2017
LinkBack
LinkBack URL
About LinkBacks