Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]()
) writes:
thank you for your help, the sums should stretch the old brain cells, not used square and cube roots since collage! square roots are done automatically by most hand calculators. for cube roots on a hand calculator I do it by stepwise refinement, ie try a number you think might work, mulitply it by itself 3 times, and see what you get. if it's too high pick a lower number and try that. if its too low try a higher number. it takes about 4 or 5 tries to get a number close enough. since the boat's design displacement doesn't change the cube root has to be found once. on a computer with Basic or a spreadsheet the cube root is just the number raised to a power of one third, ie. displacement**0.333, or in some notations displacement^0.333 -- ------------------------------------------------------------------------------ William R Watt National Capital FreeNet Ottawa's free community network homepage: www.ncf.ca/~ag384/top.htm warning: non-freenet email must have "notspam" in subject or it's returned |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
tyvek (long) | Boat Building | |||
HELP! Need suggestions on making mast & sails | Boat Building | |||
mast steps - fastep? | General | |||
Red over green mast light for sailboat | Boat Building | |||
Segmented Mast for R. Nymph? | Boat Building |