9" Eye Bolt
Andrew,
When all else fails, try McMaster-Carr. They aren't cheap, but they have almost every that exists in western technology. site is http://www.mcmaster.com/ search for eye nut and then go down list for types of SS. They might have an eyebolt too, but I didn't check. Andrew Butchart wrote: I need a 9" long - 3/8" eyebolt, either with a shoulder, or with threads all the way up. I could also use a bit of threaded rod and an eye nut if I could find someone who actually sells the blasted things. I would be able to go around the Toronto, Canada area looking for such a thing or could use mail order. Any thoughts? |
9" Eye Bolt
Andrew Butchart writes:
I need a 9" long - 3/8" eyebolt, either with a shoulder, or with threads all the way up. I could also use a bit of threaded rod and an eye nut if I could find someone who actually sells the blasted things. http://www.mscdirect.com/ http://www.use-enco.com/ |
9" Eye Bolt
Wichard #6342 3/8" eye nut
"Andrew Butchart" wrote in message . .. I need a 9" long - 3/8" eyebolt, either with a shoulder, or with threads all the way up. I could also use a bit of threaded rod and an eye nut if I could find someone who actually sells the blasted things. I would be able to go around the Toronto, Canada area looking for such a thing or could use mail order. Any thoughts? -- Andrew Butchart |
9" Eye Bolt
"Richard J Kinch" wrote in message
. .. Andrew Butchart writes: I need a 9" long - 3/8" eyebolt, either with a shoulder, or with threads all the way up. I could also use a bit of threaded rod and an eye nut if I could find someone who actually sells the blasted things. http://www.mscdirect.com/ http://www.use-enco.com/ AHA - found a good source of eye-nuts and other such fastener products. Brafasco - www.brafasco.com - locations all around southern Ontario and even a couple in the US. It was a shock after going into shops looking for eye nuts and getting a blank look to just being asked "how many do you want". -- Andrew Butchart |
All times are GMT +1. The time now is 09:09 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 BoatBanter.com