microbaloons same a laser toner?
 

I've never worked with or even seen the microbaloons used as filler in
resins on boats, but I've heard they are tiny clear plastic spheres. The
toner used in photocopiers and computer printers is also tiny plastic
spheres (to print they are melted into the paper). I was wondering if
laser toner could be used to thicken the resins. Laser toner, being
produced in large volumes would probably cost less than microbaloons. Just
a thought.


--
------------------------------------------------------------------------------
William R Watt National Capital FreeNet Ottawa's free community network
homepage: www.ncf.ca/~ag384/top.htm
warning: non-freenet email must have "notspam" in subject or it's returned

microbaloons same a laser toner?
 

Not likely considering what it cost to get a toner cartrige refilled
with just a few oz.

William R. Watt wrote:
I've never worked with or even seen the microbaloons used as filler in
resins on boats, but I've heard they are tiny clear plastic spheres. The
toner used in photocopiers and computer printers is also tiny plastic
spheres (to print they are melted into the paper). I was wondering if
laser toner could be used to thicken the resins. Laser toner, being
produced in large volumes would probably cost less than microbaloons. Just
a thought.


--
------------------------------------------------------------------------------
William R Watt National Capital FreeNet Ottawa's free community network
homepage: www.ncf.ca/~ag384/top.htm
warning: non-freenet email must have "notspam" in subject or it's returned

--
Glenn Ashmore

I'm building a 45' cutter in strip/composite. Watch my progress (or lack
there of) at: http://www.rutuonline.com
Shameless Commercial Division: http://www.spade-anchor-us.com

microbaloons same a laser toner?
 

"William R. Watt" writes:
I've never worked with or even seen the microbaloons used as filler in
resins on boats, but I've heard they are tiny clear plastic spheres. The
toner used in photocopiers and computer printers is also tiny plastic
spheres (to print they are melted into the paper). I was wondering if
laser toner could be used to thicken the resins. Laser toner, being
produced in large volumes would probably cost less than microbaloons. Just
a thought.

Very doubtful but at about $0.60/lb for generic 7.5#/ft3 balloons, why
bother?


--
Lew

S/A: Challenge, The Bullet Proof Boat, (Under Construction in the Southland)
Visit: http://home.earthlink.net/~lewhodgett for Pictures

microbaloons same a laser toner?
 

microbaloons same a laser toner?
 

I don't know about your microballoons, but my microbaloons are glass, not
plastic.
Steve
"William R. Watt" wrote in message
...
I've never worked with or even seen the microbaloons used as filler in
resins on boats, but I've heard they are tiny clear plastic spheres. The
toner used in photocopiers and computer printers is also tiny plastic
spheres (to print they are melted into the paper). I was wondering if
laser toner could be used to thicken the resins. Laser toner, being
produced in large volumes would probably cost less than microbaloons. Just
a thought.


--
--------------------------------------------------------------------------
----
William R Watt National Capital FreeNet Ottawa's free community
network
homepage: www.ncf.ca/~ag384/top.htm
warning: non-freenet email must have "notspam" in subject or it's returned

microbaloons same a laser toner?
 

Steve Lusardi wrote:
I don't know about your microballoons, but my microbaloons are glass, not
plastic.

They're also hollow, which is why they're called "balloons".

microbaloons same a laser toner?
 

Scotty says:

As long as the resin does not dissolve the stuff, you can thicken it
with almost anything, even recycled and powdered three year old boats
made of cardboard and polyester ;-O

I'm hoping I'm wrong, but that sounds suspiciously like experience talking
there. ;-)

Steve

microbaloons same a laser toner?
 

Steve Lusardi wrote:
I don't know about your microballoons, but my microbaloons are glass, not
plastic.
Steve

You can get them in glass, thermoset urethane or phenolic.

Also phenolic is a thermoset plastic. Laser toner is thermoplastic
microSPHERES. Not balloons.

--
Glenn Ashmore

I'm building a 45' cutter in strip/composite. Watch my progress (or lack
there of) at: http://www.rutuonline.com
Shameless Commercial Division: http://www.spade-anchor-us.com

microbaloons same a laser toner?
 

Are we being trolled?

"William R. Watt" wrote:

I've never worked with or even seen the microbaloons used as filler in
resins on boats, but I've heard they are tiny clear plastic spheres. The
toner used in photocopiers and computer printers is also tiny plastic
spheres (to print they are melted into the paper). I was wondering if
laser toner could be used to thicken the resins. Laser toner, being
produced in large volumes would probably cost less than microbaloons. Just
a thought.

--
------------------------------------------------------------------------------
William R Watt National Capital FreeNet Ottawa's free community network
homepage: www.ncf.ca/~ag384/top.htm
warning: non-freenet email must have "notspam" in subject or it's returned

microbaloons same a laser toner?
 

Jim Conlin ) writes:
Are we being trolled?

it was not long before the Interent creation created this new way of
responding to creative thought



--
------------------------------------------------------------------------------
William R Watt National Capital FreeNet Ottawa's free community network
homepage: www.ncf.ca/~ag384/top.htm
warning: non-freenet email must have "notspam" in subject or it's returned