Brian Nystrom says:

Soaking didn't seem to make any difference in the bend-ability of
the wood.

The old man always used to soak white oak before bending (24 hrs in the
bathtub), whether to see if it had a natural inclination to bend in a
particular direction, to help with bending, or some other reason I am not sure.
He was the builder, and I didn't question it.
He bent a lot of white oak ribs in his day.

Steve

Stephen Baker wrote:

Brian Nystrom says:

Soaking didn't seem to make any difference in the bend-ability of
the wood.

The old man always used to soak white oak before bending (24 hrs in the
bathtub), whether to see if it had a natural inclination to bend in a
particular direction, to help with bending, or some other reason I am not sure.
He was the builder, and I didn't question it.
He bent a lot of white oak ribs in his day.

If you're interested, try this test. Take a strip of whatever wood you
want to bend and soak it for 24 hours. Then, take a plane and see how
many strokes it takes on the surface to get down to dry wood. I scarf
thin stock for kayak coamings and the most penetration I've seen in red
oak or white ash is ~.010" on the sides and edges after soaking for 24
hours, with perhaps 1/4" penetration at the ends. I find it very
difficult to believe that this could possibly make any difference in the
bend-ability of the wood, since steaming alone will create similar
penetration in only a few minutes. As I mentioned previously, I found no
difference in bending between soaked stock and dry stock from the same
board, so I don't bother with soaking any longer. It strikes me as one
of those things that seems intuitively correct, but really doesn't help.

Brian N says:

It strikes me as one
of those things that seems intuitively correct, but really doesn't help.


I dunno. Dad had (at the tme I last saw him soaking oak) bee nbuilding,
designing and restoring boats for some 30-odd years. I know he wasn't a type
"A" personality, so can't imagine him wasting time or effort on something that
wasn't necessary to produce the perfect product.
Sadly, he died in '83, so I can't ask him to find out. I'll see if I can track
down his last apprentice and see what she has to say.
Steve

Stephen Baker wrote:

Brian N says:


It strikes me as one
of those things that seems intuitively correct, but really doesn't help.



I dunno. Dad had (at the tme I last saw him soaking oak) bee nbuilding,
designing and restoring boats for some 30-odd years. I know he wasn't a type
"A" personality, so can't imagine him wasting time or effort on something that
wasn't necessary to produce the perfect product.
Sadly, he died in '83, so I can't ask him to find out. I'll see if I can track
down his last apprentice and see what she has to say.

I'd be curious to know if he ever did a comparison between soaking and
not. I haven't seen any definitive tests and am just working off my own
experience and that of others I know who've tried it both ways.