Home |
Search |
Today's Posts |
#9
![]()
posted to rec.boats.building
|
|||
|
|||
![]()
On Sun, 05 Feb 2006 17:21:58 GMT, "TennisShoes"
wrote: "Mike Sr." wrote in message roups.com... Brian & Tennis Shoes, It seems you both think alike for the problem being the reed valves. Your symptom of 'burpin & fartin' out the carb can come from compression escaping the cylinder(s). The reed valves are the only thing keeping the compression where it's supposed to be. If you lift the heads (usually not hard to do) you might get a nasty surprise to find one or more rings broken or gone altogether. Brian [pilin' it on] Whatcott Altus OK |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Volvo Penta AQ120B Weber Carb Conversion Kit FS | General | |||
Jet Ski overheating problem | Cruising | |||
Jet Ski overheating problem | General | |||
Jet Ski overheating problem | Boat Building | |||
battery isolator problem! | Electronics |