Hello,

Please could anyone advise me: I've got a 15ft fibre glass boat with wooden
floor the floor has some fibre glass resin at the sides presumably to fix it
in place.

My problem is the floor is rotten! I also need to get under it to see if
theres any damage
to the bottom of the boat underneath.

Can you please advise me if I should lift this old ply floor or perhaps seal
it and put another layer of ply and also if there should be many holes in
it?!?!?!?

Thanks
Jim

Around 1/16/2004 1:31 PM, Jim wrote:

My problem is the floor is rotten! I also need to get under it to see if
theres any damage
to the bottom of the boat underneath.


Time to replace the floor. It's not very difficult, but this book
(highly recommended by members of the Classic Glastron Owners
Association) should help walk you through the process:
http://www.amazon.co.uk/exec/obidos/ASIN/0071580085

--
~/Garth - 1966 Glastron V-142 Skiflite: "Blue-Boat"
"There is nothing - absolutely nothing - half so much worth doing
as simply messing about in boats."
-Kenneth Grahame, The Wind in the Willows