Home |
Search |
Today's Posts |
|
#1
posted to rec.boats.building
|
|||
|
|||
Do-all boat?
Is anyone aware of a boat, or plans for a boat, that would encompass light
weight (1500lb), trailability, 16 - 22 ft, able to plane at high speed on a relatively small motor (15-25 mph on 25-50 hp), cabin to accommodate two people for at least weekends, and still be sailable? I realized it wouldn't excel at any of these tasks, but I am curious to know if such a do-all boat exists. Bob Swarts |
#2
posted to rec.boats.building
|
|||
|
|||
Do-all boat?
I may be wrong, but I would be surprised if it exists in a mono-hull. My
father purchased a Klepper Master at a Chicago boat show many decades ago. It purported to be both a motor boat and a sail boat. It did neither well. The broad flat run at the stern which is necessary for planing resulted in a huge wake and total lack of speed under sail. The construction wasn't adequate for a motor which would get it up onto a plane. We had some fun with it, but even Kool boats would sail rings around it. Roger http://home.insightbb.com/~derbyrm "Robert or Karen Swarts" wrote in message ... Is anyone aware of a boat, or plans for a boat, that would encompass light weight (1500lb), trailability, 16 - 22 ft, able to plane at high speed on a relatively small motor (15-25 mph on 25-50 hp), cabin to accommodate two people for at least weekends, and still be sailable? I realized it wouldn't excel at any of these tasks, but I am curious to know if such a do-all boat exists. Bob Swarts |
#3
posted to rec.boats.building
|
|||
|
|||
Do-all boat?
"derbyrm" wrote in message news:0aVtf.693947$xm3.581355@attbi_s21... I may be wrong, but I would be surprised if it exists in a mono-hull. "Robert or Karen Swarts" wrote in message ... Is anyone aware of a boat, or plans for a boat, that would encompass light weight (1500lb), trailability, 16 - 22 ft, able to plane at high speed on a relatively small motor (15-25 mph on 25-50 hp), cabin to accommodate two people for at least weekends, and still be sailable? I realized it wouldn't excel at any of these tasks, but I am curious to know if such a do-all boat exists. Bob Swarts I agree that a mono is unlikely to do it. For a small multi that might fit the criteria see http://www.members.optusnet.com.au/rhturner1/ I don't think they go to windward that well but isn't that what a motor's for? Peter HK |
#4
posted to rec.boats.building
|
|||
|
|||
Do-all boat?
I would think that any small boat capable of planing under sail would
be capable of planing (with dagger board raised) propelled by an outboard. The trick I would think would be to arrive at the minimum requirements for the outboard i.e. have the required power and at the required minimum weight ... not well put, but you know what I mean. OT: I saw a few years back at a boat show, a self-propelled surf board. It used a relatively powerful jet propulsion system. A bit bizarre but one of those turbo engines would likely meet the power/weight requirement ... not that I would want to be in the boat with one of them ... noisy or what. |
#5
posted to rec.boats.building
|
|||
|
|||
Do-all boat?
Are there many sail boats that can plane under sail regularly? The Sunfish
would, on a broad reach with a stiff breeze and a light crew (I gave away some 40 lbs to my competitors and did not profit from the conditions). Position of the engine weight (OK, the total CG) would also be critical. A few inches of daggerboard, or equivalent, are needed to give the rudder something to work against. Popping the daggerboard out momentarily is a useful trick on the Sunfish; you pivot about the rudder, but ... Your last line is a show stopper to me. As a stunt, it might work, but as an investment worth owning???? Roger http://home.insightbb.com/~derbyrm "bowgus" wrote in message oups.com... I would think that any small boat capable of planing under sail would be capable of planing (with dagger board raised) propelled by an outboard. The trick I would think would be to arrive at the minimum requirements for the outboard i.e. have the required power and at the required minimum weight ... not well put, but you know what I mean. OT: I saw a few years back at a boat show, a self-propelled surf board. It used a relatively powerful jet propulsion system. A bit bizarre but one of those turbo engines would likely meet the power/weight requirement ... not that I would want to be in the boat with one of them ... noisy or what. |
#6
posted to rec.boats.building
|
|||
|
|||
Do-all boat?
In outboard mode, no rudder req'd :-). As to that jetboat mod, the
engine would be low and inboard ... I myself,as mentioned, could not tolerate the noise. As to daggerboard, I guess our styles differ ... in a dingy/on a wind surfer on a broad reach and plane, up comes the daggerboard ... take care though else yer rockin an rollin :-) And hey, no boat is an investment :-) |
#7
posted to rec.boats.building
|
|||
|
|||
Do-all boat?
I'd guess you must have had some sort of hard chine or other lateral area
forward. I calibrated my daggerboard with a felt tip marker: 3" for running, 9" for a close reach, and full down for beating. With zero protrusion, my Sunfish pivots about the rudder! No style here, it just can't be pointed with the rudder. The return on your investment is hours of pleasure/use. A friend spent several years restoring a trawler. Two months after he finished, he'd sold it. His comment was "You can only run up and down the river so many times." I have a dinghy that's been sailed exactly once -- bad investment. Roger http://home.insightbb.com/~derbyrm "bowgus" wrote in message oups.com... As to daggerboard, I guess our styles differ ... in a dingy/on a wind surfer on a broad reach and plane, up comes the daggerboard ... take care though else yer rockin an rollin :-) And hey, no boat is an investment :-) |
#8
posted to rec.boats.building
|
|||
|
|||
Do-all boat?
thiswebsite has links to several designers that might have something to
fit you desires. http://www.duckworksmagazine.com/ |
#9
posted to rec.boats.building
|
|||
|
|||
Do-all boat?
"Robert or Karen Swarts" ) writes:
Is anyone aware of a boat, or plans for a boat, that would encompass light weight (1500lb), trailability, 16 - 22 ft, able to plane at high speed on a relatively small motor (15-25 mph on 25-50 hp), cabin to accommodate two people for at least weekends, and still be sailable? I realized it wouldn't excel at any of these tasks, but I am curious to know if such a do-all boat exists. It would be an interesting design exercise to find where the two efficiency curves cross for various displacements. There are enough formulae in boatbuilding books and free hull design computer programs for an amateur to try. The www.ncf.ca/~ag384/Solo15.htm design might come close. It's near the limit of sailing efficiency. There may be a problem trying to sell a boat build from such a design. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
rec.boats.paddle sea kayaking FAQ | General | |||
So where is...................... | General | |||
rec.boats.paddle sea kayaking FAQ | General | |||
rec.boats.paddle sea kayaking FAQ | General | |||
A Recreational Boating Message | General |