not sure if these guys do plexi windows, but they've been around,
might be able to offer suggestions

www.waterwaysystems.com

Sandy


Dan and Donna Happ ) writes:
--------------090408060605050702040205
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit

John, what color Plexi are you using? I am trying to replace the windows
on my boat and I'm having a time getting the correct color. Are you
using Translucent Acrylic black?
What color is normally used? I just bought some Gray smoked Polycarb and
the color is way off. Special order and they won't take it back. They
called it 7135 Lexan.

John Cassara wrote:

Experiment bending the Plexiglas before cutting the hole.


"Terry Spragg" wrote in message
...


I want to add a fixed window on the fore part of the cabin, so I can see
through the cabin whilst seated at the helm.

A tall cushion might be as good, but being able to look forward from below
counts, too. Maybe a bent plexiglas cowling trapped under the partly
opened fore hatch?

The forward cabin bulkhead is curved in one direction, radially around the
mast, so to speak, but not so much vertically. I have in mind to cut a
hole, then flex a sheet of plexiglas, whatever, bolting it through. I
wonder if 5200 can be trusted to never need replacing, is good enough, too
good, or if there are alternatives I have not imagined?

Terry K










--------------090408060605050702040205
Content-Type: text/html; charset=us-ascii
Content-Transfer-Encoding: 7bit

!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
html
head
title/title
/head
body
John, what color Plexi are you using? I am trying to replace the windows
on my boat and I'm having a time getting the correct color. Are you using
Translucent Acrylic black? br
What color is normally used? I just bought some Gray smoked Polycarb and
the color is way off. Special order and they won't take it back. They called
it 7135 Lexan.br
br
John Cassara wrote:br
blockquote type="cite" "
pre wrap=""Experiment bending the Plexiglas before cutting the hole.


"Terry Spragg" a class="moz-txt-link-rfc2396E" "<tspr >/a wrote in message
a class="moz-txt-link-freetext" /a...
/pre
blockquote type="cite"
pre wrap=""I want to add a fixed window on the fore part of the cabin, so I can see
through the cabin whilst seated at the helm.

A tall cushion might be as good, but being able to look forward from below
counts, too. Maybe a bent plexiglas cowling trapped under the partly
opened fore hatch?

The forward cabin bulkhead is curved in one direction, radially around the
mast, so to speak, but not so much vertically. I have in mind to cut a
hole, then flex a sheet of plexiglas, whatever, bolting it through. I
wonder if 5200 can be trusted to never need replacing, is good enough, too
good, or if there are alternatives I have not imagined?

Terry K


/pre
/blockquote
pre wrap=""!----

/pre
/blockquote
br
/body
/html

--------------090408060605050702040205--