Gunwale rubber fitting
I had to remove the gunwale rubber and now need to refit it.
Originally it was held on using resin glue, the join from the hull & top section on this fibreglass boat protrudes out 20 mm (like a tag) and the rubber section pushed over this and was held with the glue. I removed the old resin glue back to the original fibreglass. My question is how do I hold the rubber firmly in place with no gaps between the rubber edge and the hull while the glue goes off. Thanks in advance. Bruce |
All times are GMT +1. The time now is 12:50 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 BoatBanter.com