Dazed and Confuzed wrote:

can you modify the windings to make it 12 v? Sometimes you can......?


Unfortunately no. Windings on a brushless alternator are evidently
different from a normal comutator type. That was the first thing I
checked when I saw it.

--
Glenn Ashmore

I'm building a 45' cutter in strip/composite. Watch my progress (or lack
there of) at: http://www.rutuonline.com
Shameless Commercial Division: http://www.spade-anchor-us.com

Glenn Ashmore wrote:

Dazed and Confuzed wrote:

can you modify the windings to make it 12 v? Sometimes you can......?


Unfortunately no. Windings on a brushless alternator are evidently
different from a normal comutator type. That was the first thing I
checked when I saw it.

--
Glenn Ashmore

I'm building a 45' cutter in strip/composite. Watch my progress (or lack
there of) at: http://www.rutuonline.com
Shameless Commercial Division: http://www.spade-anchor-us.com

sometimes you can rewire the field windings to do that....at least you can
in large power generators. (which are really alternators). Instead of 2
windings in series, you put them in parallel for a lower voltage. But if
you can't in this case, too bad. sometimes 24 and 12 v are the same windings
just hooked up differently. Sometimes not....


--
I'd rather put more life in my days than put more days in my life......