BoatBanter.com

BoatBanter.com (https://www.boatbanter.com/)
-   Boat Building (https://www.boatbanter.com/boat-building/)
-   -   plumbing in heads and seacocks (https://www.boatbanter.com/boat-building/47686-plumbing-heads-seacocks.html)

Keith August 29th 05 12:01 PM

I'll vouch for the Raritan PH II's. I put two on board four years ago
and haven't had a single problem. One PM rebuild on each, probably
didn't even need that. Need to lube the wet/dry flush selector every
4-6 months or so, when it starts squeaking, but that's a 5 minute job.
Peggie recommends lubing the main cylinder annually or so, but on this
toilet, you may as well just rebuild it by the time you take all that
apart.

One other item.. be sure the outlet is aft of the intake!


[email protected] August 29th 05 10:23 PM

Went for a Blake Lavac Zenith for the aft head - simple and mechanical
and only 10 euros at an NL boat jumble. Bought 2 new seals - cost more
than the Zenith. Intake water is sucked from a 6 litre domestic loo
cistern which is plumbed directly into FW supply - just like at home
(fresh water capacity is 6500 litres, so I guess a little more than the
average yacht). Outlet has Y valve to tank - 2800 litres!!! or
discharge overboard via syphon loop. Pics etc at
http://www.rmstone.screaming.net/int...internal1.html


Peggie Hall August 29th 05 10:50 PM



wrote:

Went for a Blake Lavac Zenith ... Intake water is sucked from a 6 litre domestic loo
cistern which is plumbed directly into FW supply - just like at home...


Connecting ANY toilet not specifically designed to use pressured water,
or a flush water tank, to the potable water supply is very risky...cuz
there's nothing to prevent bacteria from the bowl from migrating into
the potable water supply. In fact, every mfr of raw water toilets
specifically warns against connecting the toilet or any toilet plumbing
to the fresh water supply.

I know yours is "buffered" by a separate tank, but if bacteria migrate
into that tank, they can also migrate into the plumbing.

A safe way to do it would be to y-valve the flush water tank fill into a
sink drain line...run water down the sink to fill the tank. You
accomplish the same thing without exposing the potable water supply to
contamination.

--
Peggie
----------
Peggie Hall
Specializing in marine sanitation since 1987
Author "Get Rid of Boat Odors - A Guide To Marine Sanitation Systems and
Other Sources of Aggravation and Odor"
http://www.seaworthy.com/store/custo...0&cat=6&page=1
http://shop.sailboatowners.com/detai...=400&group=327


All times are GMT +1. The time now is 11:10 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 BoatBanter.com