Oil Change Pump
 

I am trying to find an oil change pump; after
a total disaster with one from an auto parts
store (it just didn't pump, only sucked in air
through the numerous cheap hose adapters), I am
looking for recommendations for a brand that
will actually work.

Does any one have experience with either of the
following?

http://www.shop.com/op/aprod-~oil+change+pump-p8204138

http://www.bartswatersports.com/catalog.asp?P=7295

A manual one would be fine as well.

Thanks a lot,

Chris

On 12 Jul 2005 18:26:41 -0700,
Chris wrote:

I am trying to find an oil change pump; after
a total disaster with one from an auto parts
store (it just didn't pump, only sucked in air
through the numerous cheap hose adapters), I am
looking for recommendations for a brand that
will actually work.

Does any one have experience with either of the
following?

http://www.shop.com/op/aprod-~oil+change+pump-p8204138

http://www.bartswatersports.com/catalog.asp?P=7295

A manual one would be fine as well.

Thanks a lot,

Chris



I have one of the big translucent plastic cylinder vacuum ones, it works
well, and is simple enough to have little to go wrong.

--
Jim Richardson http://www.eskimo.com/~warlock
You live and learn. Or you don't live long.
-- Lazarus Long

After trying all sorts of combinations, I finally bought a vacuum chamber
bottle from WEST and have been very satisfied with its performance. The
mess factor is greatly reduced.

"Chris" wrote in message
oups.com...

I am trying to find an oil change pump; after
a total disaster with one from an auto parts
store (it just didn't pump, only sucked in air
through the numerous cheap hose adapters), I am
looking for recommendations for a brand that
will actually work.

Does any one have experience with either of the
following?

http://www.shop.com/op/aprod-~oil+change+pump-p8204138

http://www.bartswatersports.com/catalog.asp?P=7295

A manual one would be fine as well.

Thanks a lot,

Chris


I have one of the vacuum type units, a circular metal one that I bought at
West Marine. It works quite well and I appreciate the fact that I can get
it working and go away to do other things while is does its work. Those
drill pumps need some babysitting.

I have been using the drill motor pump hooked to my Dewalt cordless.

I have tried the others out there, and this by far works best, only about
$10 for the pump, $150 for the Dewalt, but you probably have a drill
already.

Mike


"Chris" wrote in message
oups.com...

I am trying to find an oil change pump; after
a total disaster with one from an auto parts
store (it just didn't pump, only sucked in air
through the numerous cheap hose adapters), I am
looking for recommendations for a brand that
will actually work.

Does any one have experience with either of the
following?

http://www.shop.com/op/aprod-~oil+change+pump-p8204138

http://www.bartswatersports.com/catalog.asp?P=7295

A manual one would be fine as well.

Thanks a lot,

Chris

IMHO, the only pump worth a flip is the Jabsco 12V pump mounted on a 3
gallon plastic bucket. I had to change it out for a five gallon pickle
bucket since my diesel holds so much oil, but I've had this thing for
years and it works perfectly, every time, with little effort.

In article .com,
says...


IMHO, the only pump worth a flip is the Jabsco 12V pump mounted on a 3
gallon plastic bucket. I had to change it out for a five gallon pickle
bucket since my diesel holds so much oil, but I've had this thing for
years and it works perfectly, every time, with little effort.

Agreed. After painting the boat with diesel crankcase oil one time too
many when the tubing popped off the hand pump I bought the motor driven
integral container unit. Had to replace the pump rotor this year, which
was a bit of a hassle (nobody had it in stock) but it makes changing the
oil a clean snap.

You'll get all manner of gadget suggestions, maybe more junk to
unstow, stow & screw with. But why not fit a permanent manual pump &
spout as has been used for decades? You could even make one fairly
easily of pipe & fittings if you can't locate one, it only has to suck
well to the height of the bucket.

Mercury Marine makes a hand operated one that works good
wrote in message
ups.com...
You'll get all manner of gadget suggestions, maybe more
junk to
unstow, stow & screw with. But why not fit a permanent
manual pump &
spout as has been used for decades? You could even make one
fairly
easily of pipe & fittings if you can't locate one, it only
has to suck
well to the height of the bucket.

Stearns 12 Volt Quick Change Oil Pump is crap had one and hated it tubes
etc. leaked and it didn't pump. I now use a manual.
GL

"Chris" wrote in message
oups.com...

I am trying to find an oil change pump; after
a total disaster with one from an auto parts
store (it just didn't pump, only sucked in air
through the numerous cheap hose adapters), I am
looking for recommendations for a brand that
will actually work.

Does any one have experience with either of the
following?

http://www.shop.com/op/aprod-~oil+change+pump-p8204138

http://www.bartswatersports.com/catalog.asp?P=7295

A manual one would be fine as well.

Thanks a lot,

Chris