Say, you're not related to a Tom Sawyer by any chance, are you ? :-)

"Ron Wierszewski" wrote in message
...
Ten years ago I built a Bolger designed sailboat...the "Teal". I did this
while working 6 days a weeks..often 10hrs/day. Before painting the hull
with
System Three products, (WR-155 primer, WR-LPU Topcoat) I tested the
materials on a small movable seat that fits in the boat. I could not get
a
uniform, sagfree finish, using a brush. I gave up the project in disgust.
Now retired , Im back at it again. I'm looking for ideas on what I should
use now, nothing exotic, a one part paint, that will hold up on a bare
plywood surface. This boat will be stored in my garage...seldom in the
water. Thanks in advance. Ron

exterior grade water-based latex house paint works well on boats.
it sluffs off gradually instead of blistering and peeling like oil based
paints tend to do.
--
------------------------------------------------------------------------------
William R Watt National Capital FreeNet Ottawa's free community network
homepage: www.ncf.ca/~ag384/top.htm
warning: non-FreeNet email must have "notspam" in subject or it's returned