Do you know a site where these curves can be downloaded? I think they are no
more copyrighted?
http://www.macnaughtongroup.com/cope...ips_curves.htm

Jukkis

If you find a source for the dwgs, please post here! I'm interested also.

Thx,
Brian D



"JP Sipponen" wrote in message
...
Do you know a site where these curves can be downloaded? I think they are
no
more copyrighted?
http://www.macnaughtongroup.com/cope...ips_curves.htm

Jukkis

What would you need them for? Their purpose is for fairing a curve and when
you are working with a CAD program the B-spline function takes their place
and does a much better job of it..

--
Glenn Ashmore

I'm building a 45' cutter in strip/composite. Watch my progress (or lack
there of) at: http://www.rutuonline.com
Shameless Commercial Division: http://www.spade-anchor-us.com

"Brian D" wrote in message
...

If you find a source for the dwgs, please post here! I'm interested also.

Thx,
Brian D



"JP Sipponen" wrote in message
...
Do you know a site where these curves can be downloaded? I think they
are
no
more copyrighted?
http://www.macnaughtongroup.com/cope...ips_curves.htm

Jukkis

What would you need them for? Their purpose is for fairing a curve and
when
you are working with a CAD program the B-spline function takes their place
and does a much better job of it..

Old friend of mine with no computer makes boats and he needs a set of them.
They cost over 350 $ so I thought i would make them with a CNC router.

Jukkis

In that case, you could download that picture, import it into Autocad, scale
it and trace the patterns. For refference, I have a set of 8 curves and #43
is 24" long and #59 is 12.5" long.

Should be fairly easy to trace because, unlike French Curves they are made
up of conic sections which is exactly what the non-uniform B-spline
algorythm does.

--
Glenn Ashmore

I'm building a 45' cutter in strip/composite. Watch my progress (or lack
there of) at: http://www.rutuonline.com
Shameless Commercial Division: http://www.spade-anchor-us.com

"JP Sipponen" wrote in message
...

What would you need them for? Their purpose is for fairing a curve and
when
you are working with a CAD program the B-spline function takes their
place
and does a much better job of it..

Old friend of mine with no computer makes boats and he needs a set of
them.
They cost over 350 $ so I thought i would make them with a CNC router.

Jukkis

In that case, you could download that picture, import it into Autocad,
scale
it and trace the patterns. For refference, I have a set of 8 curves and
#43
is 24" long and #59 is 12.5" long.

Should be fairly easy to trace because, unlike French Curves they are made
up of conic sections which is exactly what the non-uniform B-spline
algorythm does.

http://www.macnaughtongroup.com/cope...ips_curves.htm

Hmm... Yes... I have only AutoCad LT. Maybe the tracing could be done also
with CorelDraw and the curves then be imported into AutoCad LT. The quality
of the picture is a bit poor so I hope it does not need lots of rendering.
Never tried that tool... Thanks...

Jukkis

Glenn,

You're a great contributor around here and your project all by itself is a
great inspiration. The same goes for your workmanship and all the items
you've made for your boat, so don't take this wrong. My statements below
are direct because I'm about as eloquent as a runaway freight train, but
they are not personal barbs by any means, just points of information to
consider ...made so that others won't go off with incorrect definitions:

1. NURBS are not 'conic sections'. Conic sections include the family of
curves obtained by slicing a cone with a plane (circles, ellipses,
hyperbolas, parabolas, straight lines, and single points). If you constrain
a NURB to being a quadratic in 2 dimensions (n=2, k=3), then the math
produces a conic section. NURBS are far more flexible than that. Good 2D
and 3D CAD software contains options to do just this, e.g. produce
'developable surfaces' or 'conic section curves'.

2. The Copenhagen curves are special in that they hold a special place in
history. Many feel that this particular set of curves (with monotonically
increasing curl from their inflection points) are the only curves, singly or
together, that produce certain classic lines ...sheer lines, stem lines,
etcetera. Whether everybody shares that opinion or not, there *is* value in
having these curves in DWG or DXF format as a set of references that can be
used when producing boat designs with CAD ...if you share this value
statement and desire to produce 'classic Copenhagen' lines on a boat. I own
a set myself but have not taken the time to produce them in CAD. I may
someday ...if I ever run out of things to do.


Brian D




"Glenn Ashmore" wrote in message
news:VJU%d.70764$SF.41768@lakeread08...
In that case, you could download that picture, import it into Autocad,
scale
it and trace the patterns. For refference, I have a set of 8 curves and
#43
is 24" long and #59 is 12.5" long.

Should be fairly easy to trace because, unlike French Curves they are made
up of conic sections which is exactly what the non-uniform B-spline
algorythm does.

--
Glenn Ashmore

I'm building a 45' cutter in strip/composite. Watch my progress (or lack
there of) at: http://www.rutuonline.com
Shameless Commercial Division: http://www.spade-anchor-us.com

"JP Sipponen" wrote in message
...

What would you need them for? Their purpose is for fairing a curve and
when
you are working with a CAD program the B-spline function takes their
place
and does a much better job of it..

Old friend of mine with no computer makes boats and he needs a set of
them.
They cost over 350 $ so I thought i would make them with a CNC router.

Jukkis

Hi
IThen what shuld be the trouble inserting the image into a CAD program
scale it and digitize it ?

Hi
Exchouse me, but what to use these for except spending the money, realy
the graphics look like a scan from an old book do anyone acturly pay
for such ,except as antikes ?

Mean such curves is a build-in and acturly more accurate curves, in any
decent CAD program.