Hi

I am a danish boatbuilder I build and design from experience and realy
none of my boats ever proven wrong, ---- the rules about materials is
easy you can find these easy a boat this size ask this thickness of
paneling and this amount of frames my buisness is true new building
methods and design.

The 3D-Honeycomb method offer a boat at a third the cost, much stronger
in construction and if you care look into detail in the design, also a
boat build much faster and one more very important issue ; the
materials do not need to be bended everything also the assembly
framework are cut from sheet materials.

A boat is structure and panels, this structure are among the most
efficient as it involve develobment in digital tools in understanding
digital tools in using the technology of the future to replace what I
learned being a boatbuilder and what I scrapped measuring it up against
the new tools .

Materials like sheet material ask only one production line where
tradisionaly you need several productions to different types of beams
profiles, fittings nuts and bolts, here there are only sheet material
that form any round or square form, ready to be covered with the
surface digitaly unfolded from the same 3D model that shape the
framework in exact measures.

The full-scale plans must not be scaled unequaly but to cirtain degrees
, a 7 meter can be scaled to 10 meter but ofcaurse not to 20 meter.

Now this is my ansver to you, for the Bolger fanatics I will say, that
unless you want the fishermen to make their bread from boats made from
scratch shut your mouth,.

Best regards, ---- the best it can be in honor of a proud old craft.
Per Corell
Boatbuilder
Copenhagen Denmark

On 16 Jan 2005 08:33:17 -0800, wrote:

I am a danish boatbuilder I build and design from experience and realy
none of my boats ever proven wrong, ---- the rules about materials is
easy you can find these easy a boat this size ask this thickness of
paneling and this amount of frames my buisness is true new building
methods and design.

Your English has improved considerably. Have you posted pix of any
boats you have built?



Rodney Myrvaagnes NYC J36 Gjo/a


Capsizing under chute, and having the chute rise and fill without tangling, all while Mark and Sally are still behind you

Hi

If you check the Cyber-Boat Yahoo group you will se pictures of several
of the small boats I designed, build, sold plans for given plans away
for.

If you knew the old Cyber-Boat site you would have seen several more
boats build ------ Now in this group for some reson innovation and even
CAD as how used in industrie is simply not understood ; some people
here rather turn a discussion into a personal harasment pointing to
"their" favorite designer omitting the progress in digital projecting
and how boatbuilding as a craft taken all these new technologies into
count --- if you know that a CAD program carry everything from
Archimedes to Pascal and know that a CAD program is just the
calculations and tools alway's used by boatbuilders and designers, then
you also know how silli but also how dirty the discussions in this fora
work ;
Now you ask and I point you to the last boat I build, you se I alway's
combined tradisional craftmanship with modern tools, so what you se is
_not_ an old fasion boat acturly everything is made with computer ---
that is the design that is an altered Lofoten dinghie, the plans the
calculations, just everything is made with computers, --- except
building the boat from the ready cut planks, now tell me if I can build
a boat, and tell me if you think I can design one. And if you think so
please ask the other crowd to show somthing of the same quality ; ----
Please check the Foto's section to se the build boat ;

http://groups.yahoo.com/group/Cyber-...foten-dinghie/

Please check the other Cyber-Boat groups to se those build boats.
Per Corell