Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
mrQ
 
Posts: n/a
Default off topic, but please help

We want to build a pier on our weekend property...and a bulkhead as well.
Do you guys know a site that has helpful hints, etc? Maybe some pictures of
construction?
Thanks
Mark
please send to my email address


  #2   Report Post  
Didereaux
 
Posts: n/a
Default

"mrQ" wrote in :

We want to build a pier on our weekend property...and a bulkhead as
well. Do you guys know a site that has helpful hints, etc? Maybe some
pictures of construction?
Thanks
Mark
please send to my email address




You're out of luck. Piers, and particularly bulkheads are specific to a
given site. The anchoring is particularly critical and can vary greatly
from as little as a hundred feet or so up and down the shoreline.

Your best bet is to talk to the owners of the nearest bulkheads and piers,
find out as much as they know, and get the names of the outfits who did the
work. Then contact them for estimates. In a proper proposal it will be
apparent what is needed, and that leads to the how. In which case you can
make a decision as to how much of the work you can do, and how much will
have to be contracted out.

g'Luk
Didereaux

--
MonteP
"Let bygones be bygones...send a concilliatory PRETZEL to the Whitehouse!"
"Against stupidity, the very gods themselves contend in vain." - Friedrich
von Schiller
"Ignorant voracity -- a wingless vulture -- can soar only into the depths
of ignominy." Patrick O'Brian
  #3   Report Post  
Steve
 
Posts: n/a
Default





Your best bet is to talk to the owners of the nearest bulkheads and piers,
find out as much as they know, and get the names of the outfits who did
the
work. Then contact them for estimates. In a proper proposal it will be
apparent what is needed, and that leads to the how. In which case you can
make a decision as to how much of the work you can do, and how much will
have to be contracted out.

g'Luk
Didereaux


Agree, however, I suggest you also inquire about the permits..

Depending on what body of water your property is on, you may have difficulty
in getting permits for any work on the shore line (even if you own it).

If it is a US coastal water front or regional water front, the Dept of
Natural Resources seems to have the final say about work or construction on
the water front. Some times the UA Army Corp of Engineers gets involved with
construction details and plans.

Recently there have been restriction placed on using creosote treated
pilings in any water front construction. Now there talking about restriction
on the 'green' treated stuff (has arsenic).

As I travel around the Pac. Northwest waterfront, both commercial and
private, I am discouraged by the vast number of docks and bulkhead that have
gone into disrepair, primarily because of the cost and gov. red tape, just
to replace pilings.

Good luck.

Steve
s/v Good Intentions


  #4   Report Post  
Tom Watson
 
Posts: n/a
Default

I don't know anything about the cost involved but there has been a
tendency towards concrete dock/breakwaters in the pacific north west.
you may have less problems with polution and the permance of the
structure. Check friday harbour for a large dock/breakwater of this design.
Tom

Steve wrote:

Your best bet is to talk to the owners of the nearest bulkheads and piers,
find out as much as they know, and get the names of the outfits who did
the
work. Then contact them for estimates. In a proper proposal it will be
apparent what is needed, and that leads to the how. In which case you can
make a decision as to how much of the work you can do, and how much will
have to be contracted out.

g'Luk
Didereaux



Agree, however, I suggest you also inquire about the permits..

Depending on what body of water your property is on, you may have difficulty
in getting permits for any work on the shore line (even if you own it).

If it is a US coastal water front or regional water front, the Dept of
Natural Resources seems to have the final say about work or construction on
the water front. Some times the UA Army Corp of Engineers gets involved with
construction details and plans.

Recently there have been restriction placed on using creosote treated
pilings in any water front construction. Now there talking about restriction
on the 'green' treated stuff (has arsenic).

As I travel around the Pac. Northwest waterfront, both commercial and
private, I am discouraged by the vast number of docks and bulkhead that have
gone into disrepair, primarily because of the cost and gov. red tape, just
to replace pilings.

Good luck.

Steve
s/v Good Intentions



Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Off Topic Posting Has Finally Hit Its Inevitable Bottom. Don ßćiley General 8 October 1st 11 04:39 PM
Slightly off topic Neil General 0 July 26th 04 07:17 AM
Flogging a Dead Horse (on topic) Gould 0738 General 3 July 23rd 04 11:18 AM
on topic/off topic same ole General 2 December 10th 03 01:02 AM


All times are GMT +1. The time now is 10:09 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017