Home |
Search |
Today's Posts |
#4
|
|||
|
|||
On Sun, 5 Sep 2004 09:49:03 +0200, "Steve Lusardi"
wrote: My guess is that it is not electrical. I think your flex plate drive is either loose or worn out. The alternator has bearings only on the outboard end. The engine rear main bearing acts as the other armature bearing. This mechanical connection is usually done through a flex plate which is bolted to the engine flywheel and a splined hub drives the armature or rotor. To check this, the alternator must be removed from the engine. =============================================== Thanks, your assessment of not being electrical jibes with my observations. What would explain the intermittent nature of the vibration given a more or less constant electrical load? Is the flex plate a coupling with a rubber hub? |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
UK red diesel costs. | Cruising | |||
Old diesel fuel - two questions | Cruising | |||
uk diesel costs | Power Boat Racing | |||
UK red diesel costs. | General | |||
Diesel outboard? | Cruising |