Home |
Search |
Today's Posts |
#9
|
|||
|
|||
It might not be feasible to loft the boat with a computer program but you can enter the table of offsets into hull design programs to look at a 3D wire frame model on the screen, and to get a bunch of calculated numbers for the hull. I've used two free hull design programs, the first for MS-DOS although there might be a free Windows version by now at www.bludepeterdesign.com, and the second for Windows restricted to boats built our of plywood panels which will plot the the panels for cutting out of sheets of plywood at www.carlsondesign.com. Both programs require some time and patience to learn how to use. Ed Jackson ) writes: I have a table of offsets for a hull design I would like to build. Does anyone know of any softawre that I can use to plot these with? No big deal if I have to do it by hand, but thought software might be interesting. Thank you. Ed -- ------------------------------------------------------------------------------ William R Watt National Capital FreeNet Ottawa's free community network homepage: www.ncf.ca/~ag384/top.htm warning: non-FreeNet email must have "notspam" in subject or it's returned |