On Tue, 24 Aug 2004 19:58:23 -0700, Lloyd Sumpter wrote:

Hi,

I'm putting running lights in my 12ft aluminum skiff. I'm running the
wires through a harness and want to run it down the inside chine (don't
want it down the keel, and the gunwale is outside so can't really do it
there). How do I attach the plastic harness to the aluminum? I obviously
don't want to drill holes...

Lloyd

I'm not sure I understand what you're talking about 100%. But if I wanted
to bond flexible plastic tubing to aluminum, which is what I think you are
doing, I would probably do one of two things:

1) use contact cement (possibly automotive GOOP, which is available in
any big hardware store in the US) or

2) glue some kind of aluminum guides or clamps in place, possibly with
epoxy, then run the flexible conduit tubing through the guides.

It seems to me like a contact cement is a good choice because it would be
hard to clamp the harness in place long enough for a slow-curing adhesive.
If you can clamp it in place, then go ahead and use the 5200 recommended
by another poster.

Maybe I'm misunderstanding what you are trying to do.

--Mac