On Fri, 13 Aug 2004 17:25:37 -0400, "Doug Dotson" wrote:

If it just small cracks then laying down more cloth is probably
overkill.

I want to add some strength to it. It still feels strong, and
there aren't any spots I feel a danger of falling through, but
it's 30 years old too. I'm thinking if I add another layer of cloth,
or maybe even 2, it should last another 30 years. I'm 45, and
would like it to outlast me.

I'm going through the same kind of exersize after
removing my teak decks. If the old surface is gelcoat, then
laying cloth over it is a bad idea. The gelcoat will have to be
removed to get to the existing glass. The secondary bond
characterists of resins over gelcoat is not good.

Thanks for that. Other people have said the same thing.
I have two possible approaches in mind in an attempt to
overcome that problem.
1. sand it off, down to the old glass
2. apply a layer of 1/4" plywood

(the following is posted twice in this thread):
I've been told that if I use plywood, unless I use marine grade
it will eventually buckle and swell because only marine grade
is treated in a way which removes all moisture from the wood.
So even if I get a good seal on it, unless I use marine grade
the moister which is contained in the wood will make it swell.
That doesn't really make sense to me since if it's not swolen
when I put it on, I don't see why it would swell later if it doesn't
absorb any more moisture, but two different people have told
me the same thing.

The
solution that I am using is applying 2 coats of epoxy barrier,
then a 2-part polyurethane finish.

Doug
s/v Callista

Thanks again....I'll look into doing that.