Menu

sawing large plysheets

Search this Thread

Prev

Previous Post

Next Post

Next

#2

Report Post

Wayne.B

Posts: n/a

Default

sawing large plysheets

On 25 Jul 2004 05:55:53 -0700, (yihang bmc-unsw)
wrote:
i was thinking of placing them on SUV tyres which should provide
enough clearance for the circular saw. would the weight be sufficient
of will i have to clamp it somehow.

i guess ill get some saw horses for the smaller section. but it seems
to me tyres will be more stable and its not as far off the ground, so
the cutoffs are supported as they come off.
========================================

If you have a level concrete floor to work on, here's what works for
me. I use 6 or 7 furring strips about 4 feet long and lay them down
on the floor, plywood goes on top. The plywood is supported every foot
or so which is more than adequate. The cutoffs are fully supported
and everything is rock solid as you make the cut. I use an 8 foot
piece of MDF for a fence, clamped on each end. Set the depth of cut
for just slightly more than the plywood thickness.

Reply With Quote

Reply With Quote

Thread Tools	Search this Thread
Show Printable Version	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Posting Rules
Smilies are On [IMG] code is Off HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
publication HOWTO build trailer for a large sailboat ?	Rusty O	Boat Building	6	March 14th 04 11:17 PM
Block Heaters for Large Detroit Diesels	Wayne.B	General	8	February 10th 04 12:30 AM
Large rowboat for large family	Paul Squire	Boat Building	19	December 20th 03 04:10 PM
Large Searay Boat Group...Is there one in Florida that gets together?	Larry	Cruising	0	July 31st 03 02:01 AM
Lost for ever hatch cover large 18x19		Boat Building	3	July 7th 03 06:30 AM

All times are GMT +1. The time now is 07:52 PM.

About Us

"It's about Boats"

Contact Us BoatBanter Home Privacy Statement

Copyright © 2017