Home |
Search |
Today's Posts |
|
#1
![]()
posted to rec.boats.building
|
|||
|
|||
![]()
We keep our john boat in the river 24-7. It appears that there is about a
3/4" growth of algae on the wet surfaces. Is there a way to prevent this and, failing that, what is the best way to get it off. Getting it out up a river bank can be done, but it is not easy. |
#2
![]()
posted to rec.boats.building
|
|||
|
|||
![]()
On Mon, 5 Oct 2009 11:24:10 -0400, "Dan Listermann"
wrote: We keep our john boat in the river 24-7. It appears that there is about a 3/4" growth of algae on the wet surfaces. Is there a way to prevent this and, failing that, what is the best way to get it off. Getting it out up a river bank can be done, but it is not easy. You can use an anti-fouling paint designed for fresh water but it will still need to be cleaned once in a while. Best bet is to pull it out on a trailer and pressure wash it, or skid it out with rollers and a 4wd truck. |
#3
![]()
posted to rec.boats.building
|
|||
|
|||
![]() "Dan Listermann" wrote in message ... We keep our john boat in the river 24-7. It appears that there is about a 3/4" growth of algae on the wet surfaces. Is there a way to prevent this and, failing that, what is the best way to get it off. Getting it out up a river bank can be done, but it is not easy. I pulled the boat out of the river on to our floating dock ( wasn't sure I could do that) last night. The algae is only along the bottom edge of the transom - fairly harmless. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Algae-X revisited and concluded... | Boat Building | |||
Algae-X revisited and concluded... | Cruising | |||
Algae-X again. | Cruising | |||
Algae-X experience? | Cruising | |||
Completely scraped bottom. What proceedure should I follow to seal the bottom? | Electronics |