BoatBanter.com

BoatBanter.com (https://www.boatbanter.com/)
-   ASA (https://www.boatbanter.com/asa/)
-   -   CT boating accident (https://www.boatbanter.com/asa/82362-ct-boating-accident.html)

Scotty July 10th 07 05:52 PM

CT boating accident
 
http://www.courant.com/news/local/hc...h0709.artjul09,
0,326717.story?coll=hc_tab01_layout

One Killed In Boating Accident
Woman, 53, Dies After Runaway Motorboat Crashes Into
Sailboat, Throwing Its Four Passengers Into The Connecticut
River

OLD SAYBROOK - A runaway motorboat whose operator had fallen
overboard crashed into a sailboat Sunday on the Connecticut
River and killed one of four people out on an afternoon
sail, officials said.

The motorboat operator, Gregory Siege, 44, of Madison, was
arrested shortly after the 3:50 p.m. accident and charged
with first-degree reckless operation of a vessel while
intoxicated by alcohol and or drugs, officials said.

The four people aboard the sailboat were tossed into the
river during the accident but were quickly taken out of the
water. The three who survived were taken to a hospital in
New Haven for treatment, said Dennis Schain, a spokesman for
the state Department of Environmental Protection.

Schain said the person who was killed was a 53-year-old
woman.

Schain said Sunday night that he was not certain when the
identities of the people involved could be released because
next of kin were still being notified.

Schain said the accident was still under investigation, and
the state's attorney's office in New London is assisting
investigators.

After the accident, which occurred south of the Amtrak
railroad bridge between Old Saybrook and Old Lyme, the
unmanned motorboat continued speeding through the water as
emergency officials tried to stop it.

A vessel from Sea Tow, a nearby marine company, was able to
track the runaway motorboat, a 20-foot center console boat
typically used for fishing, and stop it by snagging the
propeller with a line, Schain said.

Officials said the river was crowded with boaters and that
they were lucky more vessels were not involved in the
accident.

"It was crazy. It was cuckoo," said Stephen Basil of Old
Lyme, who saw boats zooming to the accident scene shortly
after the crash.

Claire Kilbride of Meriden said she and her husband were
traveling back to the Between the Bridges Marina, near the
accident site, when they saw the motorboat going in circles.

"The police were all around it just waiting for it to run
out of gas.

"It was very busy out there. There was a lot of traffic,"
she said.






Scotty July 10th 07 08:17 PM

CT boating accident
 
they should shoot that guy, and then hang him.

SBV

"Dave" wrote in message
...
On Tue, 10 Jul 2007 12:52:38 -0400, "Scotty"

said:

One Killed In Boating Accident


Thanks, Scotty. That happened about a mile or two from the

quiet cove where
we moor our boat. I heard a little bit about it when we

came in to the club,
and a bit more about it from my daughter who stayed up for

an extra day
Monday. But that's the first full account I'd seen.




Maxprop July 11th 07 12:24 AM

CT boating accident
 

"Scotty" wrote in message
...
they should shoot that guy, and then hang him.


Don't forget about the part where they cut off his nuts and feed 'em to a
shark while he watches.

Max



Capt. JG July 11th 07 01:00 AM

CT boating accident
 
"Maxprop" wrote in message
ink.net...

"Scotty" wrote in message
...
they should shoot that guy, and then hang him.


Don't forget about the part where they cut off his nuts and feed 'em to a
shark while he watches.

Max



Then, you pluck out his eyes!

--
"j" ganz @@
www.sailnow.com




Maynard G. Krebbs July 11th 07 02:27 AM

CT boating accident
 
On Tue, 10 Jul 2007 12:52:38 -0400, "Scotty"
wrote:

snippity-snip





I'm not a power boater but it's my understanding that power boats have
a lanyard and a killswitch.
Does anyone know how that really is set up nowdays?
Mark E. Williams

Maxprop July 11th 07 04:03 AM

CT boating accident
 

"Maynard G. Krebbs" wrote in message
...
On Tue, 10 Jul 2007 12:52:38 -0400, "Scotty"
wrote:

snippity-snip





I'm not a power boater but it's my understanding that power boats have
a lanyard and a killswitch.
Does anyone know how that really is set up nowdays?


My Boston Whaler (inboard) has a lanyard with a kill fitting on one end that
quite similar to that on an outboard. It is independent of the key.

Max



Scotty July 11th 07 01:41 PM

CT boating accident
 

"Maynard G. Krebbs" wrote in
message ...



I'm not a power boater but it's my understanding that

power boats have
a lanyard and a killswitch.
Does anyone know how that really is set up nowdays?
Mark E. Williams


Outboards have a (deadman) kill switch with a lanyard that
can clip on to the operator , but common practice is to clip
it on to the motor, or simply remove it alltogether.



Joe July 12th 07 04:49 PM

CT boating accident
 
On Jul 11, 7:41 am, "Scotty" wrote:
"Maynard G. Krebbs" wrote in
messagenews:rbc893t29e0tk547fg82kgcefl5v64n7dp@4ax .com...



I'm not a power boater but it's my understanding that

power boats have
a lanyard and a killswitch.
Does anyone know how that really is set up nowdays?
Mark E. Williams


Outboards have a (deadman) kill switch with a lanyard that
can clip on to the operator , but common practice is to clip
it on to the motor, or simply remove it alltogether.


Check out this video of the out of control boat, then a classic trip
of a tow line that capsizes the guys attempting to lasso the boat. I
hear the line they used fouled the prop and shut down the engine. You
seldom see this on film, it's what every tow boater should fear the
most. When it happens on big tugs most everyone dies.

http://www.wcsh6.com/video/news/play...?aid=21848&bw=

Joe


Joe July 12th 07 05:10 PM

CT boating accident-towing endorsement?
 
On Jul 12, 10:49 am, Joe wrote:
On Jul 11, 7:41 am, "Scotty" wrote:

"Maynard G. Krebbs" wrote in
messagenews:rbc893t29e0tk547fg82kgcefl5v64n7dp@4ax .com...


I'm not a power boater but it's my understanding that

power boats have
a lanyard and a killswitch.
Does anyone know how that really is set up nowdays?
Mark E. Williams


Outboards have a (deadman) kill switch with a lanyard that
can clip on to the operator , but common practice is to clip
it on to the motor, or simply remove it alltogether.


Check out this video of the out of control boat, then a classic trip
of a tow line that capsizes the guys attempting to lasso the boat. I
hear the line they used fouled the prop and shut down the engine. You
seldom see this on film, it's what every tow boater should fear the
most. When it happens on big tugs most everyone dies.

http://www.wcsh6.com/video/news/play...?aid=21848&bw=

Joe


PS: To Jon..the newest Captain in town with a towing endorsement..

What did they do wrong?
What should they have done?

Joe



Capt. JG July 12th 07 06:33 PM

CT boating accident-towing endorsement?
 
"Joe" wrote in message
ups.com...
On Jul 12, 10:49 am, Joe wrote:
On Jul 11, 7:41 am, "Scotty" wrote:

"Maynard G. Krebbs" wrote in
messagenews:rbc893t29e0tk547fg82kgcefl5v64n7dp@4ax .com...


I'm not a power boater but it's my understanding that
power boats have
a lanyard and a killswitch.
Does anyone know how that really is set up nowdays?
Mark E. Williams


Outboards have a (deadman) kill switch with a lanyard that
can clip on to the operator , but common practice is to clip
it on to the motor, or simply remove it alltogether.


Check out this video of the out of control boat, then a classic trip
of a tow line that capsizes the guys attempting to lasso the boat. I
hear the line they used fouled the prop and shut down the engine. You
seldom see this on film, it's what every tow boater should fear the
most. When it happens on big tugs most everyone dies.

http://www.wcsh6.com/video/news/play...?aid=21848&bw=

Joe


PS: To Jon..the newest Captain in town with a towing endorsement..

What did they do wrong?
What should they have done?

Joe


Not the newest I hope! I've had my OUPV for several years. I couldn't view
the vid very well, but it looked like they were going way to fast, way to
close.

--
"j" ganz @@
www.sailnow.com





All times are GMT +1. The time now is 08:29 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 BoatBanter.com