LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
posted to alt.sailing.asa
external usenet poster
 
First recorded activity by BoatBanter: Jul 2006
Posts: 732
Default Thank you Ian Malcolm. Sail pictures.

Ian,

Good luck with your advice. If it Neal that rec'v. it, it just may be
late all the way around.

I tried to warn him about cheap Hong Kong Sail for his Coranodo but he
got stuck with them.

It sure looks like that Jib was made with an Iron Cable for a Bolt Rope.
Now what kind of an Idiot would accept a sail whose bolt rope was
magnetic. An who would have been stupid enough to not have replaced it
after owning the boat almost a year?

As I said; Good Luck

http://community.webtv.net/tassail/ILLDRINKTOTHAT

  #2   Report Post  
posted to alt.sailing.asa
external usenet poster
 
First recorded activity by BoatBanter: Sep 2006
Posts: 1,423
Default Thank you Ian Malcolm. Sail pictures.


"Thom Stewart" wrote
Good luck with your advice. If it Neal that rec'v. it, it just may be
late all the way around.

I tried to warn him about cheap Hong Kong Sail for his Coranodo but he
got stuck with them.

It sure looks like that Jib was made with an Iron Cable for a Bolt Rope.
Now what kind of an Idiot would accept a sail whose bolt rope was
magnetic. An who would have been stupid enough to not have replaced it
after owning the boat almost a year?


Duh! I don't think my little sail would fit a Coronado 27. I only wish my sails
were only a year old. I think they're the originals that came with the boat.
That would make them about twenty years old. No wonder the cable rusted
through. They probably were put away wet with salt water on them and
sat in the bag inside the boat for years before I bought it.
But Ian's given me some good advice. I'm going to snip out some of the
zigzag stitching and I'm gonna get all the broken rusty cable out the back
way. Then I'm gonna sew it back up using the same holes. It's really hard to
push a needle through the sailcloth but easy where there's already a hole.
Then I'm gonna roll the sail up tight along the luff. Then I'm gonna soak the
luff in a bucket with a couple inches of oxalic acid in it until the rust is gone.
I googled sailmakers supplies and found a great site for things I need.
http://www.sailmakerssupply.com/prod_detail_list/24 Check out those little
plastic swivel hanks. I'm gonna get about eight of those and just screw them
on. I can put a little bolt rope in when I put the luff tape on. No more green
corroding brass hanks for me and no more corroding hank grommets.
Then I'm gonna get some dacron luff tape and sew it on using a sewing
machine. http://www.sailmakerssupply.com/prod_detail_list/30 Probably
the five inch wide tape would be perfect. It can wrap around the luff and
be about two and a half inches wide on both sides. With zigzag stitches it'll
look perfect. It will also cover up the black patches.
I decided I don't want another cable. It makes the sail stiff and hard
to put in the bag. I can clean and scrape the grommets on the head and tack
and make them look better if the acid doesn't do it. Then maybe I can use
some of the oxalic acid to get rid of the stains on the rest of the sail. Then
I can use something to brighten them up. They'll be almost like new. And it
won't cost too much.
Don't you wish you had a boat.? See all the fun your missing :-) I guess
you sold yours. I didn't realize it till I read one of your posts recently. The
one about how your glad you don't have a boat any more because of the snow....
Hey, you should get a little Tangerine like mine. You could keep it on a trailer
in your driveway and you could go sailing when it was nice. The mast isn't too
hard to get up. One person to steady it and one person to pull it up using the
jib halyard.

Cheers,
Ellen


  #3   Report Post  
posted to alt.sailing.asa
Joe Joe is offline
external usenet poster
 
First recorded activity by BoatBanter: Jul 2006
Posts: 3,698
Default Thank you Ian Malcolm. Sail pictures.


Ellen MacArthur wrote:
"Thom Stewart" wrote
Good luck with your advice. If it Neal that rec'v. it, it just may be
late all the way around.

I tried to warn him about cheap Hong Kong Sail for his Coranodo but he
got stuck with them.

It sure looks like that Jib was made with an Iron Cable for a Bolt Rope.
Now what kind of an Idiot would accept a sail whose bolt rope was
magnetic. An who would have been stupid enough to not have replaced it
after owning the boat almost a year?


Duh! I don't think my little sail would fit a Coronado 27. I only wish my sails
were only a year old. I think they're the originals that came with the boat.
That would make them about twenty years old. No wonder the cable rusted
through. They probably were put away wet with salt water on them and
sat in the bag inside the boat for years before I bought it.
But Ian's given me some good advice. I'm going to snip out some of the
zigzag stitching and I'm gonna get all the broken rusty cable out the back
way. Then I'm gonna sew it back up using the same holes. It's really hard to
push a needle through the sailcloth but easy where there's already a hole.
Then I'm gonna roll the sail up tight along the luff. Then I'm gonna soak the
luff in a bucket with a couple inches of oxalic acid in it until the rust is gone.
I googled sailmakers supplies and found a great site for things I need.
http://www.sailmakerssupply.com/prod_detail_list/24 Check out those little
plastic swivel hanks. I'm gonna get about eight of those and just screw them
on. I can put a little bolt rope in when I put the luff tape on. No more green
corroding brass hanks for me and no more corroding hank grommets.
Then I'm gonna get some dacron luff tape and sew it on using a sewing
machine. http://www.sailmakerssupply.com/prod_detail_list/30 Probably
the five inch wide tape would be perfect. It can wrap around the luff and
be about two and a half inches wide on both sides. With zigzag stitches it'll
look perfect. It will also cover up the black patches.
I decided I don't want another cable. It makes the sail stiff and hard
to put in the bag. I can clean and scrape the grommets on the head and tack
and make them look better if the acid doesn't do it. Then maybe I can use
some of the oxalic acid to get rid of the stains on the rest of the sail. Then
I can use something to brighten them up. They'll be almost like new. And it
won't cost too much.
Don't you wish you had a boat.? See all the fun your missing :-) I guess
you sold yours. I didn't realize it till I read one of your posts recently. The
one about how your glad you don't have a boat any more because of the snow....
Hey, you should get a little Tangerine like mine. You could keep it on a trailer
in your driveway and you could go sailing when it was nice. The mast isn't too
hard to get up. One person to steady it and one person to pull it up using the
jib halyard.



You would be better off trashing the sail and buying a new one.

Joe
Cheers,
Ellen


  #4   Report Post  
posted to alt.sailing.asa
external usenet poster
 
First recorded activity by BoatBanter: Sep 2006
Posts: 1,423
Default Thank you Ian Malcolm. Sail pictures.


"Joe" wrote

You would be better off trashing the sail and buying a new one.



Probably. But then I wouldn't be able to tell people, "original sails".
A boat with original sails is kewler don't you think?

Cheers,
Ellen


  #5   Report Post  
posted to alt.sailing.asa
external usenet poster
 
First recorded activity by BoatBanter: Jul 2006
Posts: 2,070
Default Thank you Ian Malcolm. Sail pictures.


"Ellen MacArthur" wrote in
message
reenews.ne
t...

"Joe" wrote

You would be better off trashing the sail and buying a

new one.


Probably. But then I wouldn't be able to tell people,

"original sails".
A boat with original sails is kewler don't you think?



No. A boat with NEW sails is more desirable.

Hope this helps
Scotty




  #6   Report Post  
posted to alt.sailing.asa
external usenet poster
 
First recorded activity by BoatBanter: Sep 2006
Posts: 1,423
Default Thank you Ian Malcolm. Sail pictures.


"Scotty" wrote
No. A boat with NEW sails is more desirable.


Yeah right! Then people would say. "Look at that stupid bitch. She spent
two thousand dollars on sails for a 300 dollar boat." Duh!

Cheers,
Ellen


  #7   Report Post  
posted to alt.sailing.asa
external usenet poster
 
First recorded activity by BoatBanter: Oct 2006
Posts: 2,109
Default Thank you Ian Malcolm. Sail pictures.

Ellen MacArthur wrote:
"Scotty" wrote

No. A boat with NEW sails is more desirable.



Yeah right! Then people would say. "Look at that stupid bitch. She spent
two thousand dollars on sails for a 300 dollar boat." Duh!

Cheers,
Ellen


2K for a boat that size? You really don't know how to shop.
  #8   Report Post  
posted to alt.sailing.asa
external usenet poster
 
First recorded activity by BoatBanter: Jul 2006
Posts: 116
Default Thank you Ian Malcolm. Sail pictures.

Ellen MacArthur wrote:

"Scotty" wrote

No. A boat with NEW sails is more desirable.



Yeah right! Then people would say. "Look at that stupid bitch. She spent
two thousand dollars on sails for a 300 dollar boat." Duh!

Cheers,
Ellen


Funny, I got new sails for my Albacore and the P.O. bought new sails for
our yacht a few months before we bought it. Both boats are *far* older
than the boat you showed us pictures of. No-one is laughing at us and
most fellow skippers are quite envious.

Busted, Again :-)

--
Ian Malcolm. London, ENGLAND. (NEWSGROUP REPLY PREFERRED)
ianm[at]the[dash]malcolms[dot]freeserve[dot]co[dot]uk
[at]=@, [dash]=- & [dot]=. *Warning* HTML & 32K emails -- NUL:
'Stingo' Albacore #1554 - 15' Early 60's, Uffa Fox designed,
All varnished hot moulded wooden racing dinghy.
  #9   Report Post  
posted to alt.sailing.asa
external usenet poster
 
First recorded activity by BoatBanter: Jul 2006
Posts: 2,070
Default Thank you Ian Malcolm. Sail pictures.


"Ellen MacArthur" wrote in
message
reenews.ne
t...

"Scotty" wrote
No. A boat with NEW sails is more desirable.


Yeah right! Then people would say. "Look at that

stupid bitch. She spent
two thousand dollars on sails for a 300 dollar boat." Duh!



As opposed to, ''Look at that stupid bitch with the nice
knockers'' ?

SV


  #10   Report Post  
posted to alt.sailing.asa
Joe Joe is offline
external usenet poster
 
First recorded activity by BoatBanter: Jul 2006
Posts: 3,698
Default Thank you Ian Malcolm. Sail pictures.


Ellen MacArthur wrote:
"Joe" wrote

You would be better off trashing the sail and buying a new one.



Probably. But then I wouldn't be able to tell people, "original sails".
A boat with original sails is kewler don't you think?


No. It detracts from the 120 dollars the boat and sails are worth.

You can make enough in one night too buy new sails ....

Joe










Cheers,
Ellen




 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
J35 Sail for Sail Capt. Rob ASA 2 August 17th 06 11:32 PM
J35 sail for sale Capt. RB General 0 August 17th 06 01:15 PM
Q: sail design and keel Morgan Ohlson Boat Building 5 August 25th 04 08:38 PM
The future of yacht design - 10 myths scotched Frank ASA 0 June 28th 04 02:42 PM
sail horsepower? William R. Watt Boat Building 21 November 5th 03 02:36 AM


All times are GMT +1. The time now is 09:58 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017