LinkBack Thread Tools Search this Thread Display Modes
  #81   Report Post  
Seahag
 
Posts: n/a
Default

Freestanding outdoor fireplace thingamabob for Tim's (grey haired dude from
the boatyard?) backyard so we don't freeze running Scupper! Sheesh!

Seahag

"Scott Vernon" wrote:
"Chiminea for Tim'' ???


"Seahag" wrote:


It might take longer, we bought a Chiminea for Tim yesterday...gonna

have
fires all winter!

Seahag

"Scott Vernon" wrote in message
...
Ats OK, I got 11 months for her to cool down.

Scotty

"katysails" wrote in message
...
You gonna be in a whole speck of trouble if you keep pickin on
her...

"Scott Vernon" wrote in message
...

"katysails" wrote ...
Haggie can't count...

she can when she's sober.













  #82   Report Post  
Nav
 
Posts: n/a
Default

I'm a little puzzled by your back stay toggle. It seems to be bronze in
contact with stainless. This is a very bad metal combination for
electrolysis -which would occur with all the salt spray lashing over it
from your ocean voyaging. I recommend replacing the toggle with
stainless as well. Might save a catastrophic rig failure.

Cheers



Capt. Neal® wrote:
http://captneal.homestead.com/littleperfections.html

For your viewing pleasure.

CN


  #83   Report Post  
Capt. Neal®
 
Posts: n/a
Default

There is no electrolysis with those two metals combined
in the atmosphere. Electrolysis only occurs in the presence
of an electrolyte. What little salt water that may splash
up on the stay does not get through the T-9 Boeshield
it is sprayed with from time to time.

For the toggle action to work the softer bronze is
necessary. Stainless on stainless would gall.

You should know that.

CN

"Nav" wrote in message ...
I'm a little puzzled by your back stay toggle. It seems to be bronze in
contact with stainless. This is a very bad metal combination for
electrolysis -which would occur with all the salt spray lashing over it
from your ocean voyaging. I recommend replacing the toggle with
stainless as well. Might save a catastrophic rig failure.

Cheers



Capt. Neal® wrote:
http://captneal.homestead.com/littleperfections.html

For your viewing pleasure.

CN



  #84   Report Post  
Nav
 
Posts: n/a
Default



Capt. Neal® wrote:

There is no electrolysis with those two metals combined
in the atmosphere. Electrolysis only occurs in the presence
of an electrolyte. What little salt water that may splash
up on the stay does not get through the T-9 Boeshield
it is sprayed with from time to time.


Why so little salt? After a good thrash to windward (like I had this
weekend in 30 knots) every surface gets covered with salt.

For the toggle action to work the softer bronze is
necessary. Stainless on stainless would gall.

You should know that.


I have stainless toggles. They don't gall.

Cheers

  #85   Report Post  
Capt. Neal®
 
Posts: n/a
Default

ON A SPLIT BACKSTAY WAY DOWN ON THE COAMING?
You must have an awfully poor design there. The only time
I get salt water in the cockpit is running downwind in a
gale.

Upwind it's dry.

CN

"Nav" wrote in message ...

Why so little salt? After a good thrash to windward (like I had this
weekend in 30 knots) every surface gets covered with salt.

For the toggle action to work the softer bronze is
necessary. Stainless on stainless would gall.

You should know that.


I have stainless toggles. They don't gall.

Cheers



  #86   Report Post  
Nav
 
Posts: n/a
Default



Capt. Neal® wrote:

ON A SPLIT BACKSTAY WAY DOWN ON THE COAMING?
You must have an awfully poor design there. The only time
I get salt water in the cockpit is running downwind in a
gale.

Upwind it's dry.


Have you really never sailed to windward in a big sea -you know when the
bow buries and spray flies everywhere?

Cheers

  #87   Report Post  
Capt. Neal®
 
Posts: n/a
Default


That's where you racers fail to appreciate a real cruising
boat. Look at my bow. It does not bury and throw spray
the length of the boat. It does not have that slack entry
like race boats nor a hull design with no shear so the bow is
no higher than the gunnels in the center of the yacht.

I've seen race boats punching through waves. My fine
blue water cruising yacht rides up and over the waves.

CN


"Nav" wrote in message ...


Capt. Neal® wrote:

ON A SPLIT BACKSTAY WAY DOWN ON THE COAMING?
You must have an awfully poor design there. The only time
I get salt water in the cockpit is running downwind in a
gale.

Upwind it's dry.


Have you really never sailed to windward in a big sea -you know when the
bow buries and spray flies everywhere?

Cheers


  #88   Report Post  
Nav
 
Posts: n/a
Default

It won't ride over them and stay dry they get 4m high.

Chhers

Capt. Neal® wrote:

That's where you racers fail to appreciate a real cruising
boat. Look at my bow. It does not bury and throw spray
the length of the boat. It does not have that slack entry
like race boats nor a hull design with no shear so the bow is
no higher than the gunnels in the center of the yacht.

I've seen race boats punching through waves. My fine
blue water cruising yacht rides up and over the waves.

CN


"Nav" wrote in message ...


Capt. Neal® wrote:


ON A SPLIT BACKSTAY WAY DOWN ON THE COAMING?
You must have an awfully poor design there. The only time
I get salt water in the cockpit is running downwind in a
gale.

Upwind it's dry.


Have you really never sailed to windward in a big sea -you know when the
bow buries and spray flies everywhere?

Cheers




  #89   Report Post  
Capt. Neal®
 
Posts: n/a
Default


Yes it will. Cruisers don't even attempt to go to weather
in those conditions. There's always an alternative destination
downwind.

CN

"Nav" wrote in message ...
It won't ride over them and stay dry they get 4m high.

Chhers

Capt. Neal® wrote:

That's where you racers fail to appreciate a real cruising
boat. Look at my bow. It does not bury and throw spray
the length of the boat. It does not have that slack entry
like race boats nor a hull design with no shear so the bow is
no higher than the gunnels in the center of the yacht.

I've seen race boats punching through waves. My fine
blue water cruising yacht rides up and over the waves.

CN


"Nav" wrote in message ...


Capt. Neal® wrote:


ON A SPLIT BACKSTAY WAY DOWN ON THE COAMING?
You must have an awfully poor design there. The only time
I get salt water in the cockpit is running downwind in a
gale.

Upwind it's dry.


Have you really never sailed to windward in a big sea -you know when the
bow buries and spray flies everywhere?

Cheers





  #90   Report Post  
Nav
 
Posts: n/a
Default

Always? You would run downwind until you meet a lee shore?

Cheers

Capt. Neal® wrote:
Yes it will. Cruisers don't even attempt to go to weather
in those conditions. There's always an alternative destination
downwind.

CN

"Nav" wrote in message ...

It won't ride over them and stay dry they get 4m high.

Chhers

Capt. Neal® wrote:


That's where you racers fail to appreciate a real cruising
boat. Look at my bow. It does not bury and throw spray
the length of the boat. It does not have that slack entry
like race boats nor a hull design with no shear so the bow is
no higher than the gunnels in the center of the yacht.

I've seen race boats punching through waves. My fine
blue water cruising yacht rides up and over the waves.

CN


"Nav" wrote in message ...


Capt. Neal® wrote:



ON A SPLIT BACKSTAY WAY DOWN ON THE COAMING?
You must have an awfully poor design there. The only time
I get salt water in the cockpit is running downwind in a
gale.

Upwind it's dry.


Have you really never sailed to windward in a big sea -you know when the
bow buries and spray flies everywhere?

Cheers





 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT +1. The time now is 04:21 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017