LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Joe
 
Posts: n/a
Default Canada Powerlines outdated & Sailors get 120,000 Volt

http://www.canada.com/ottawa/ottawac...3-2b2c92639eee

20 ft boat, 40 ft mast? I dont think so.

Joe
  #2   Report Post  
felton
 
Posts: n/a
Default Canada Powerlines outdated & Sailors get 120,000 Volt

On 4 Aug 2004 08:09:28 -0700, (Joe) wrote:

http://www.canada.com/ottawa/ottawac...3-2b2c92639eee

20 ft boat, 40 ft mast? I dont think so.

Joe


Ouch. The article didn't say her mast was 40', though. It said the
power lines were *supposed* to provide for 40' of clearance, which
isn't very much. A Sabre 28 needs 41', not including antenna or wind
instruments. Anyway, it would take a brave sailor to sail under a
power line where the clearance was "close" Anyway, it said her mast
was something along the lines of 23'. Good thing she wasn't sailing a
steel boat
  #3   Report Post  
Wally
 
Posts: n/a
Default Canada Powerlines outdated & Sailors get 120,000 Volt

Joe wrote:

http://www.canada.com/ottawa/ottawac...3-2b2c92639eee

20 ft boat, 40 ft mast? I dont think so.


It says the standard mast for that boat is 7.2m - 23.7'. Allow, say, 3' for
waterline to mast step, and the height of the mast above water is about 27',
max. The only thing I can think of is that the power line was sagging more
than it should have been (I assume the area isn't tidal).


--
Wally
www.artbywally.com
www.wally.myby.co.uk


  #4   Report Post  
Walt
 
Posts: n/a
Default Canada Powerlines outdated & Sailors get 120,000 Volt

Wally wrote:
Joe wrote:

http://www.canada.com/ottawa/ottawac...3-2b2c92639eee

20 ft boat, 40 ft mast? I dont think so.


It says the standard mast for that boat is 7.2m - 23.7'. Allow, say, 3' for
waterline to mast step, and the height of the mast above water is about 27',
max. The only thing I can think of is that the power line was sagging more
than it should have been (I assume the area isn't tidal).


Well, you don't actually have to contact the wire with your mast to get
electrocuted. At 120,000 volts the EMF is capable of jumping a gap.
That's why you see the big insulators on all high-voltage lines.

That said, take a 7.2 meter mast, add a meter for waterline to mast
step, and add .3 meters for a burgee or windex and you're looking at 8.5
meters above the water, still three and a half meters shy of the
(allegedly) 12 meter power line. Something ain't adding up.

--
//-Walt
//
// http://cagle.slate.msn.com/working/040514/matson.gif
  #5   Report Post  
Joe
 
Posts: n/a
Default Canada Powerlines outdated & Sailors get 120,000 Volt

felton wrote in message



Good thing she wasn't sailing a
steel boat


Wrong! If they were on a steel hull the bird cage effect would of
prevented them from getting harmed. RedCloud has been struck by
lighting with us aboard twice and it had no effect besides an arc mark
on top of the mast.

On a plastic boat the least line of resistance is a human body and all
your electronics.

Joe
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Oh Canada! Bob Crantz ASA 0 July 17th 04 03:32 PM
24 Volt boat systems PeterV Electronics 7 December 20th 03 07:44 PM


All times are GMT +1. The time now is 07:07 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017