12v drills
 

Here we see bob**** in all his glory, displaying his professional tool set:
http://images.amazon.com/images/P/B0...1.LZZZZZZZ.jpg

here is his massive professional grinder:
http://www.amazon.com/exec/obidos/tg...-6237933-75383
58?v=glance&s=toys&me=A3UN6WX5RRO2AG&vi=pictures&i mg=14#more-pictures

SV



"Wally" wrote in message
...
Scott Vernon wrote:

In reality, Bobs' grinder is a B&D 1/4'' drill
with a sanding wheel.

That would explain the 'trigger speed control' he claims it has.


--
Wally
www.artbywally.com

12v drills
 

if the battery pack has a plug there should be no problem. If it's a
fancy holder then the holder will need to be modified to add a new
socket for external battery power -assuming it can be taken apart.

Cheers

Martin Baxter wrote:
MC wrote:

You don't know how to wire and solder a plug? You can get them
radioshack...




There are a couple of problems here MC, number one; does the
drill in question actually have a jack or does it use a removable
battery pack that plugs into a separate charger?

If it is the latter then a small inverter is going to be the
easiest solution to implement.

If the former, then you may have other problems; does the drill
contain charge control circuitry, or is it going to be necessary
to make some sort external controller, or should you just put in
a current limiting resister and take a chance on frying or drastically
shorting the life of the batteries?

Cheers
Marty

12v drills
 

We call them "Timesavers" I believe. In my Plant we use them for surfacing
clutch plates. I think they are similar, but have never heard of the
manufacturer you mentioned.
"Scott Vernon" wrote in message
...
No. what is it? A lot of the bigger shops use air grinders/ polishers.
Ever
seen a Waldrich Seigen 90'' roll grinder?

Scotty

"The Carrolls" wrote in message
...
ever hears of a B&D bobcat grinder? If not you havent been in much of a
fab
shop.
"Scott Vernon" wrote in message
...
A pro grinder, eh? WTF is that? I've been in a lot of big steel fab
,
machine shops & weld shops and can't recall ever seeing a B&D tool.

You lose!

SV


"Bobsprit" wrote in message
...
Bob strikes me as the type of person to have a Hilti gun and no clue
as
to
how to use it.... for the sole purpose to claim he has professional
grade
tools. Next he'll claim he only buys Milwaukee Tools!


Sorry, Mooron, I buy tools that last. I've had a B&D professional
grinder
for
11 years and used it on boat tasks for 9 years. My Porta Cable
sander
is
not
only durable, it also does a better job than others I've used. The
Makita
is a
film set standard for the setbuilders union and costs under 150.00.
At
such a
small price why cheap out with a Ryobi? There's just no reason to
not
have
the
better tool when the cost is so small.
As usual, you're not only wrong, but shown to be a cooked fish in
the
process!
Enjoy your Walgreen Drill!!!

Bwahahahahahaha!

RB

12v drills
 

This one can grind rolls 40' long , 60'' dia.
http://www.ingersoll.de/wasi/us/ I spelled Siegen wrong.

SV


"The Carrolls" wrote in message
...
We call them "Timesavers" I believe. In my Plant we use them for surfacing
clutch plates. I think they are similar, but have never heard of the
manufacturer you mentioned.
"Scott Vernon" wrote in message
...
No. what is it? A lot of the bigger shops use air grinders/ polishers.
Ever
seen a Waldrich Seigen 90'' roll grinder?

Scotty

"The Carrolls" wrote in message
...
ever hears of a B&D bobcat grinder? If not you havent been in much of
a
fab
shop.
"Scott Vernon" wrote in message
...
A pro grinder, eh? WTF is that? I've been in a lot of big steel
fab
,
machine shops & weld shops and can't recall ever seeing a B&D tool.

You lose!

SV


"Bobsprit" wrote in message
...
Bob strikes me as the type of person to have a Hilti gun and no
clue
as
to
how to use it.... for the sole purpose to claim he has
professional
grade
tools. Next he'll claim he only buys Milwaukee Tools!


Sorry, Mooron, I buy tools that last. I've had a B&D professional
grinder
for
11 years and used it on boat tasks for 9 years. My Porta Cable
sander
is
not
only durable, it also does a better job than others I've used. The
Makita
is a
film set standard for the setbuilders union and costs under
150.00.
At
such a
small price why cheap out with a Ryobi? There's just no reason to
not
have
the
better tool when the cost is so small.
As usual, you're not only wrong, but shown to be a cooked fish in
the
process!
Enjoy your Walgreen Drill!!!

Bwahahahahahaha!

RB

12v drills
 

Nope, never seen any thing quite like that. Our timesavers are more like a
belt sander that is about 5' wide with a 12' long belt. By the way a Wildcat
(I had the wrong name before) B&D grinder is a 17 amp hand held snag
grinder. They haven't made them for about 5 years, maybe longer, mine is
about 15 years old and weighs about 70 pounds. A little heavy to use for
polishing a boat hull.
"Scott Vernon" wrote in message
...
This one can grind rolls 40' long , 60'' dia.
http://www.ingersoll.de/wasi/us/ I spelled Siegen wrong.

SV


"The Carrolls" wrote in message
...
We call them "Timesavers" I believe. In my Plant we use them for
surfacing
clutch plates. I think they are similar, but have never heard of the
manufacturer you mentioned.
"Scott Vernon" wrote in message
...
No. what is it? A lot of the bigger shops use air grinders/
polishers.
Ever
seen a Waldrich Seigen 90'' roll grinder?

Scotty

"The Carrolls" wrote in message
...
ever hears of a B&D bobcat grinder? If not you havent been in much
of
a
fab
shop.
"Scott Vernon" wrote in message
...
A pro grinder, eh? WTF is that? I've been in a lot of big steel
fab
,
machine shops & weld shops and can't recall ever seeing a B&D
tool.

You lose!

SV


"Bobsprit" wrote in message
...
Bob strikes me as the type of person to have a Hilti gun and no
clue
as
to
how to use it.... for the sole purpose to claim he has
professional
grade
tools. Next he'll claim he only buys Milwaukee Tools!


Sorry, Mooron, I buy tools that last. I've had a B&D
professional
grinder
for
11 years and used it on boat tasks for 9 years. My Porta Cable
sander
is
not
only durable, it also does a better job than others I've used.
The
Makita
is a
film set standard for the setbuilders union and costs under
150.00.
At
such a
small price why cheap out with a Ryobi? There's just no reason
to
not
have
the
better tool when the cost is so small.
As usual, you're not only wrong, but shown to be a cooked fish
in
the
process!
Enjoy your Walgreen Drill!!!

Bwahahahahahaha!

RB

12v drills
 

Ok, seen them before, never noticed a name. 70 lb handheld?? sheesh. My 7''
is 15 amp and guesstimate 20 lbs. and that gets heavy after a bit.

SV


"The Carrolls" wrote in message
...
Nope, never seen any thing quite like that. Our timesavers are more like a
belt sander that is about 5' wide with a 12' long belt. By the way a
Wildcat
(I had the wrong name before) B&D grinder is a 17 amp hand held snag
grinder. They haven't made them for about 5 years, maybe longer, mine is
about 15 years old and weighs about 70 pounds. A little heavy to use for
polishing a boat hull.
"Scott Vernon" wrote in message
...
This one can grind rolls 40' long , 60'' dia.
http://www.ingersoll.de/wasi/us/ I spelled Siegen wrong.

SV


"The Carrolls" wrote in message
...
We call them "Timesavers" I believe. In my Plant we use them for
surfacing
clutch plates. I think they are similar, but have never heard of the
manufacturer you mentioned.
"Scott Vernon" wrote in message
...
No. what is it? A lot of the bigger shops use air grinders/
polishers.
Ever
seen a Waldrich Seigen 90'' roll grinder?

Scotty

"The Carrolls" wrote in message
...
ever hears of a B&D bobcat grinder? If not you havent been in much
of
a
fab
shop.
"Scott Vernon" wrote in message
...
A pro grinder, eh? WTF is that? I've been in a lot of big
steel
fab
,
machine shops & weld shops and can't recall ever seeing a B&D
tool.

You lose!

SV


"Bobsprit" wrote in message
...
Bob strikes me as the type of person to have a Hilti gun and
no
clue
as
to
how to use it.... for the sole purpose to claim he has
professional
grade
tools. Next he'll claim he only buys Milwaukee Tools!


Sorry, Mooron, I buy tools that last. I've had a B&D
professional
grinder
for
11 years and used it on boat tasks for 9 years. My Porta Cable
sander
is
not
only durable, it also does a better job than others I've used.
The
Makita
is a
film set standard for the setbuilders union and costs under
150.00.
At
such a
small price why cheap out with a Ryobi? There's just no reason
to
not
have
the
better tool when the cost is so small.
As usual, you're not only wrong, but shown to be a cooked fish
in
the
process!
Enjoy your Walgreen Drill!!!

Bwahahahahahaha!

RB

12v drills
 

Makita drills are considered by many to be the best. They have a charger
that works off 12v cigar plug. Available often on EBAY.

http://us.st7.yimg.com/store4.yimg.c...1775_193811319

Scott Vernon wrote:
Boats-r-US has a Seafit 12v drill on sale. Is there a 12v drill which will
run and/or charge off your boat batteries?

Scott Vernon
Plowville PA __/)__/)__

12v drills
 

Makita drills are considered by many to be the best. They have a charger
that works off 12v cigar plug. Available often on EBAY.


Forget it. I already suggested Makita to the dang fool. He wants a drill from
SeaSnooze that will run off hearing aid batteries.

RB

12v drills
 

Thank you Grouchy. That's what I was looking for.


--
Scott Vernon
Plowville PA __/)__/)__

"Grouch" wrote in message
...
Makita drills are considered by many to be the best. They have a charger
that works off 12v cigar plug. Available often on EBAY.

http://us.st7.yimg.com/store4.yimg.c...1775_193811319

Scott Vernon wrote:
Boats-r-US has a Seafit 12v drill on sale. Is there a 12v drill which
will
run and/or charge off your boat batteries?

Scott Vernon
Plowville PA __/)__/)__

12v drills
 

You are welcome. I just went through the wondering phase and my BIL set
me straight to the charger he has used for years in his work truck.

BTW best to stick with NiMH over the older NiCad batteries. They last
longer without the memory effects and have a much lower self discharge
rate (means they will still have a charge weeks/months after taken off
the charger.


Scott Vernon wrote:
Thank you Grouchy. That's what I was looking for.


--
Scott Vernon
Plowville PA __/)__/)__

"Grouch" wrote in message
...

Makita drills are considered by many to be the best. They have a charger
that works off 12v cigar plug. Available often on EBAY.

http://us.st7.yimg.com/store4.yimg.c...1775_193811319

Scott Vernon wrote:

Boats-r-US has a Seafit 12v drill on sale. Is there a 12v drill which

will

run and/or charge off your boat batteries?

Scott Vernon
Plowville PA __/)__/)__