Home |
Search |
Today's Posts |
#2
|
|||
|
|||
Neal's new Sails
wrote Just make sure you know who is really making your sails. We bought a new main 2 years ago, and out in the middle of the Gulf of Mexico every single piece of webbing holding the slides on disintegrated! I was later told that the sail was farmed out to a cheap shop in Hong Kong, and I got inferior materials. Just be careful. I hope you got the thing stitched back together, only this time with the good stuff. Donal wrote: I wonder! Last week, the UK agency for Hong Kong Sails offered my club a couple of "discount" vouchers. We discussed the matter at the club, and of course, we didn't come to any firm conclusions. How could we, without actually seeing the sails? A couple of valid points were made. Some lofts insist on visiting your boat to take measurements. This visit must cost about $200, maybe $300. Not all buyers are looking for the absolute limit of performance from their Dacron sails. Furthermore, many sailors are competent enough to take their own measurements. True. But then there are a lot who merely think they are. The other main point concerned the labour vs material costs. If labour costs represent a high proportion of the price of a sail, then it would be easy to reduce costs, and maintain quality, by moving the manufacturing to China. However, if the material represents the bulk of the manufacturing cost, then Hong Kong sails would have to be producing inferior quality sails. Well, having a sailmkaer come on board your boat is labor... and can't be farmed out overseas. But he can do things for your sails that cannot be done any other way. *Good* materials are expensive. We are friends with a couple that runs a local canvas shop, and they use an expensive UV resistant thread... so expensive that the thread for stitching up a dodger & bimini for a 40 footer is $200 wholesale. How much more would be in a sail for that same boat? It's a significant part of the cost. I've talked with (& sailed with too) a lot of people who seem to want to brag about how cheaply they got their sails. I always smile & nod politely but thinking 'what's the point? Would $X more break the bank when you've already paid for a $YY,000 boat?' I have also sailed with some people who have horribly bagged out worthless sails, often they want advice on adjustments & trim. One guy I sailed with last year had his boat's original sails from 25 years ago... the thing would not tack through 110 degrees, the main was so baggy. But we enjoyed sailing all the same. It's a question of what you want. Fresh Breezes- Doug King |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
HELP! Need suggestions on making mast & sails | Boat Building | |||
EARTHSHIP SAILS IN VALENCIA, SPAIN APRIL 2004 EARTHSHIP SAILS IN VALENCIA, SPAIN APRIL 2004 | Cruising | |||
Neal's Awful Sails | ASA | |||
Sails officially ordered. | ASA | |||
Even better prices on working sails. | ASA |