According to Eric Hiscock from his book, "Cruising Under Sail".

BEAM. The extreme breadth of a vessel. Also a transverse member
supporting the deck. A vessel is said to be on her beam ends when
she is heeled excessively so that her masts are horizontal. Anything
which lies outside a vessel on an imaginary line drawn from amidships
at right angles to the fore-and-aft line is said to on the beam or abeam.

I hope this helps.

S.Simon


"Floatything" wrote in message
news
A simple question (no 'Simple' replies please)..

How does one measure the beam of a boat? Is it at the widest point at
deck
level? does it include the rubbing strake? Clearly there must be a
standard for this - but I haven't found a definitive answer - in the 1/2
hour I've been looking - obviously doing the wrong search :-( So what's
the answer..



Finally... After years of dismally inadiquate attemts.... Simon managed to
supply a correct responce.

Admittedly it was a VERY basic question....

But its a start.

Probably looked it up for once.

"James" wrote in message
...











According to Eric Hiscock from his book, "Cruising Under Sail".

BEAM. The extreme breadth of a vessel. Also a transverse member
supporting the deck. A vessel is said to be on her beam ends when
she is heeled excessively so that her masts are horizontal. Anything
which lies outside a vessel on an imaginary line drawn from amidships
at right angles to the fore-and-aft line is said to on the beam or abeam.

I hope this helps.

S.Simon


"Floatything" wrote in message
news
A simple question (no 'Simple' replies please)..

How does one measure the beam of a boat? Is it at the widest point at
deck
level? does it include the rubbing strake? Clearly there must be a
standard for this - but I haven't found a definitive answer - in the 1/2
hour I've been looking - obviously doing the wrong search :-( So
what's
the answer..



Finally... After years of dismally inadiquate attemts.... Simon managed to
supply a correct responce.

Admittedly it was a VERY basic question....

But its a start.

Of course - you notice that Neal didn't actually know the answer, he just quoted Hiscock directly.
This is the third time he's done that; he must have stolen the book from the library.

I have nothing against Hiscock, a great sailor and his books are an enjoyable read, but I never
thought of him as the definitive authority on all issues of naval architecture and terminology.

--
-jeff

"Jonathan Ganz" wrote in message ...
Probably looked it up for once.

"James" wrote in message
...











According to Eric Hiscock from his book, "Cruising Under Sail".

BEAM. The extreme breadth of a vessel. Also a transverse member
supporting the deck. A vessel is said to be on her beam ends when
she is heeled excessively so that her masts are horizontal. Anything
which lies outside a vessel on an imaginary line drawn from amidships
at right angles to the fore-and-aft line is said to on the beam or abeam.

I hope this helps.

S.Simon


"Floatything" wrote in message
news
A simple question (no 'Simple' replies please)..

How does one measure the beam of a boat? Is it at the widest point at
deck
level? does it include the rubbing strake? Clearly there must be a
standard for this - but I haven't found a definitive answer - in the 1/2
hour I've been looking - obviously doing the wrong search :-( So
what's
the answer..



Finally... After years of dismally inadiquate attemts.... Simon managed to
supply a correct responce.

Admittedly it was a VERY basic question....

But its a start.

It's only remotely possible that Neal stole the book from the library. He
usually
steals from K-Mart, according to his own admission, and theives rarely
change
their habits.

"Jeff Morris" wrote in message
...
Of course - you notice that Neal didn't actually know the answer, he just
quoted Hiscock directly.
This is the third time he's done that; he must have stolen the book from
the library.

I have nothing against Hiscock, a great sailor and his books are an
enjoyable read, but I never
thought of him as the definitive authority on all issues of naval
architecture and terminology.

--
-jeff

"Jonathan Ganz" wrote in message
...
Probably looked it up for once.

"James" wrote in message
...











According to Eric Hiscock from his book, "Cruising Under Sail".

BEAM. The extreme breadth of a vessel. Also a transverse member
supporting the deck. A vessel is said to be on her beam ends when
she is heeled excessively so that her masts are horizontal. Anything
which lies outside a vessel on an imaginary line drawn from amidships
at right angles to the fore-and-aft line is said to on the beam or
abeam.

I hope this helps.

S.Simon


"Floatything" wrote in message
news A simple question (no 'Simple' replies please)..

How does one measure the beam of a boat? Is it at the widest point
at
deck
level? does it include the rubbing strake? Clearly there must be a
standard for this - but I haven't found a definitive answer - in the
1/2
hour I've been looking - obviously doing the wrong search :-( So
what's
the answer..



Finally... After years of dismally inadiquate attemts.... Simon
managed to
supply a correct responce.

Admittedly it was a VERY basic question....

But its a start.