Don't Post to This Thread
I've received a rather strange reply from the originator of this thread
which clarifies the real intent of the original, 'rambling' post. Although
the question is still good - the reason for it is intentionally misstated.
I've challenged the guy privately in response to his e-mail and I'll wait
for his response today before I post the rest.
But do take the warning that this guy is a risk to both his students and
perhaps even yourself.
-Douglas Tooley
"Felsenmeer" wrote in message
.. .
"ChuckB" wrote
It is my understanding that the level (feet) as measured by a USGS
gauge is not standardized (across many gauges). So the level on one
gauge on a river many not have anything to do with the level on
another gauge on the same river or a different river.
That's correct- the level is based on a somewhat arbitrary datum, thus "5
feet on the gauge" just means that the level is 5 ft. above the datum.
The
datum is tied to sea level, so you might have a datum of 0 at 800 ft.
above
sea level, so when the gage is at 5 ft., the water surface elevation is at
805 ft. MSL. 0 ft. does not equate to the stream bed either, in many (if
not most) cases.
|