BoatBanter.com - View Single Post

Hank©[_2_]

On 5/1/2013 9:35 PM, wrote:
On Wed, 01 May 2013 20:29:10 -0400, Wayne B
wrote:

On Wed, 01 May 2013 20:05:45 -0400, wrote:

This came about because the 2 wire devices do not work with LEDs and
CFLs. They work OK with incandescents.

===

For us laymen, can you explain why that is?

The switcher power supply in a CFL will store the minuscule current
the 2 wire line powered devices use and when the filter capacitor
reaches the point that the switcher generates a usable amount of
power, it flashes. This becomes a relaxation oscillator.
I have tried CFLs in a couple of my occupancy sensor locations and
they all flash. You can usually get by this by putting a small
incandescent in parallel with the CFL.
I have a 15' string of LED rope light on a SSR (triac) controlled
circuit and it never really turns off. You always see a dim glow
coming from it.
You sort of defeat the purpose of using a 13w CFL or LED if you have
to put a 15w light bulb in there to turn the switch off.

Your life is too complicated by this stuff.