On 3/8/13 6:54 PM, Eisboch wrote:


"F.O.A.D." wrote in message
m...


I'm just astonished at the utter stupidity underlying many of the
"accidents." Example: how dumb do you have to be to make sure a firearm
is unloaded before you clean it?

----------------------------------------------

Some of the pistols can be confusing ... especially the ones on the "MA
Compliant" list up here. There are so many supposed "safeties" on them
that you really have to stop and think about the one you are handling if
you don't use it often.

I have a Walther PPK/2. To lock the slide open, you first release the
magazine. That allows the slide to lock in the open position. Won't
lock open if there's a magazine installed.

To release the slide, a magazine must be re-inserted ... either loaded
or empty. The actual "safety" switch is really a de-cocker. It puts a
barrier plate up so when the slide is released, it prevents the hammer
from hitting the firing pin.

It took me a while to understand how to use it and it's different than
some of the other pistols I've tried. I can kinda see how someone
could screw up if they have several guns with different operating
characteristics or procedures.

That's why I like revolvers. Simple.




Hmmm. On my CZ, you can drop the mag, rack the slide to make sure
anything in the chamber pops out, and then lock the slide to take a
close look into the chamber and barrel. That's probably more typical.
You can also lock the slide open with a mag loaded. But the first step
to inspecting the firearm is to drop the mag, then rack the slide, then
lock the slide to make sure the firearm is empty. I never deviate from
that.

On the other hand, I don't keep a loaded mag in my CZ. I keep an empty
mag in there.