"Peter" wrote in message
om...
Connection details are available at http://www.yeomanuk.co.uk
According to this doc http://www.yeomanuk.co.uk/tech/yds062.doc the
cable should have the following wires:
WHITE - NMEA IN (A)
BLUE - NMEA IN (B)
GREEN - NMEA OUT (A)
Thin BLACK - 0 volts and NMEA OUT (B)
RED - 12 volts power
YEOMAN Thick BLACK (screen) is optional. Connect to ship's ground or
0 volts.


That would be the pinout an colors for the 5 pin connector. Mine has a 4 pin
data connector and a seperater power connector..

I took my Yeoman apart yesterday and with a view of the internal wiring and
colors, I think I can now figure this out.

Thanks for the reply.

Steve
s/v Good Intentions