On 9/2/2012 2:40 PM, wrote:
On Sun, 02 Sep 2012 13:57:42 -0400, Meyer wrote:

On 9/2/2012 1:49 PM, wrote:
On Sun, 02 Sep 2012 01:58:53 -0400, JustWait
wrote:

On 9/1/2012 4:08 PM, wrote:


I just did a quick google for dock boxes and got a million shapes and
sizes... Is there something I missed in a post, something unusual you
are looking for?

This is what I am replacing

I am constrained by the width between the edge of the boat and the
door.

http://gfretwell.com/ftp/ed%20on%20boat.jpg

Hows about rotating the box counter clockwise 90 degrees? Is that doable?

It starts eating up deck space pretty fast that way.


Sorry I missed the beginning of the conversation but I get it now. I
guess aluminum might be best. Of course I would whip it out in a day out
of Occoume Plywood, a quart of Epoxy, some wood flower and some two inch
tape. I noticed someone suggested two layers of three inch tape, but you
are not building a yacht, just a box

You could also use a core material a lot lighter than plywood too... You
could make it all composite with a honeycomb fill and tight weave
fiberglass cloth...