On Sat, 22 Nov 2003 19:01:50 GMT, Bruce in Alaska
wrote:

In article ,
Gary Schafer wrote:

One exception, in this case we are talking about an antenna tuner with
its output going to a coax line that then goes to the antenna. The
antenna being something near 50 ohms but far enough from it to produce
a 3:1 SWR on its feed line.

So in this case we have 2 transmission lines. One between the
transmitter and the tuner and one between the tuner and the antenna.

Regards
Gary



Actually, in the "Marine Radio" context anything that connects to
the High Impedance side of the tuner is considered not Feedline
but part of the antenna. OK, if just call that part "Transmission Line"
rather than a second feedline? this will allow discussee's to
differentate between the two pieces of the reference system, and
not get them confused while making their points.....

Bruce in alaska


Well, this thing started out as a discussion of SWR on a 50 ohm VHF
feed line. Nothing to do with HF single ended antennas and associated
couplers.

HF got mixed in to the discussion because most are familiar with coax
line antenna tuners. 50 ohm in 50 ohm or near that out. The principles
are the same of course.

With HF things are a little easier to manipulate to do test on than
VHF.

My referring to "feed line" or "transmission line" are all referring
to coax cable. One is synonymous with the other.

I think most are using the same terms.

Sorry for any confusion.

Regards
Gary