View Single Post
  #5   Report Post  
johnh
 
Posts: n/a
Default 12 volt power supply?

Unfortunately, the Powerstream units output 13.8 v not 12, or do they have
one that I didn't see?

john

"Glenn Ashmore" wrote in message
news:rwulb.86558$sp2.20655@lakeread04...
Here is an off the shelf 270W PS that I am going to use to feed a
regulated 12VDC bus in the nav station:
http://www.powerstream.com/Produz10.htm

If you really want to DIY check out

http://www.powerdesigners.com/InfoWe...converter.shtm

David wrote:
If you have a design, I would really like to see it.

I am trying to get a design for a 12 volt DC to 12 volt DC regulated

power
supply. The design is to provide 12 volts DC + or - 5% output from an

input
of between 8 volts and 16 volts DC.
The purpose of this is to run a computer in a sail boat. The battery

voltage
in the boat may vary from 8 volts to 16 volts when it is charging.

I currently have an ATX computer power supply that runs off 12 volts DC,

it
provides 3 and 5 volts nicely, but the 12 volt rail is actually the

input
voltage. So, when the input is 12 volts all is well, if it goes high,

well
that could be a real problem, and if it goes low, the computer will shut
down. If you can help it would be much appreciated



--
Glenn Ashmore

I'm building a 45' cutter in strip/composite. Watch my progress (or lack
there of) at: http://www.rutuonline.com
Shameless Commercial Division: http://www.spade-anchor-us.com