I too am a compulsive DIYer but when I looked at what is required I
faded. To get the 2 mile range at 360º you have to use 5 or 6 of the
new ultra bright LEDs and drive them with a special power supply circuit
and you still need the fresnel lens and water tight base. I estimated
the cost would be only slightly than less the available lights and I
wouldn't know if it was bright enough until the CG came along side with
their citation book open.
John Salyer wrote:
I'm a putzer, and really would like to build one myself. Spending $114 for
a light as described isn't my cup of tea. It is more the challenge, than it
is spending the money.
---------------------------------------------------
"Steven Dubnoff" wrote in message
...
On Sat, 11 Oct 2003 20:56:48 -0400, "John Salyer"
wrote:
I've found a bunch of stuff on replacing the incandescent bulb in the
anchor
light with an LED array.
If your time is worth anything, just buy one of these:
http://www.sealite.com.au/product_pa...rod_code=SL-05
This is an absolutely terrific unit at a reasonable price.
Best,
Steve
----------------------------------------------------------------
Steven Dubnoff
Circle Systems We make your data instantly usable.
Download Stat/Transfer from http://www.stattransfer.com
1001 Fourth Avenue, #3200 (206) 682-3783
Seattle, WA 98154 Fax (206) 328-4788
--
Glenn Ashmore
I'm building a 45' cutter in strip/composite. Watch my progress (or lack
there of) at:
http://www.rutuonline.com
Shameless Commercial Division:
http://www.spade-anchor-us.com