They don't want you to reduce the thickness of the coatings, especially on
the edges. I've used it before and it builds well. If you really need to
sand to get bug parts, etc. out, go VERY easy, or use a 3M red scotchbrite
pad.

--


Keith
__
The things that come to those that wait may be the things left by those who
got there first.
"Jon Klapper" wrote in message
...
I've decided to use cetol on my teak. I've prepped and cleaned and
sanded and applied the first coat. Why does Cetol recommend NOT
sanding between coats? Seems to me that the only way to get a smooth
buildup is to sand off the high spots between coats. Then again I'm an
old varnish guy without much time these days, thus the Cetol. Got any
answers? I shure would like a fine smooth finish.

Captainjon