How many coats are you planning on doing? What I used to do
is apply several coats, then sand, then apply a final coat or two.
I'm switching to Bristol Finsh., but same regime.

Doug
s/v Callista

"Jon Klapper" wrote in message
...
I've decided to use cetol on my teak. I've prepped and cleaned and
sanded and applied the first coat. Why does Cetol recommend NOT
sanding between coats? Seems to me that the only way to get a smooth
buildup is to sand off the high spots between coats. Then again I'm an
old varnish guy without much time these days, thus the Cetol. Got any
answers? I shure would like a fine smooth finish.

Captainjon