Yes, I've seen the too. And thanks for the website. I've saved it.
"Jim Conlin" wrote in message
...
For the smaller sizes, i've seen cast thimbles which were solid and bored
3/8"
or so for a shackle pin. I think I got 'em from sailmakers.

See also
http://www.multihullboatbuilder.com/...icshrouds.html



Garland Gray II wrote:

Good point.
I may end up w/ss for this. I want to replace my lifelines with Amsteel.
"Jim Conlin" wrote in message
...
I recollect learning that only cast thimbles or heavy galvanized
thimbles
were
generally stiff enough not to deform when loaded to a nylon or dacron
rope's
full safe working load. Stainless ones were second place and plastic
a
distant
third. Ask a competent rigger before using a plastic thimble in a
line
that's
to carrry any significant load.

Ron Magen wrote:

Garland,
I've seen them quite consistently at West Marine {all over}. I would
try
them, first. Other places to 'look' are Jamestown Distributors
{Rhode
Island}, Hamilton Marine {Searsport, Maine - for REAL, 'Workin'
Stuff'},
and
Defender Industries {Conn}.

My only caveat is, I'm not sure about the 'larger' sizes - 1/2 in
line
and
up. I know I used white ones for my 3/8in and 1/2in mooring
pennants -
got
them at the Philly West Marine store.

Regards & Good Luck,
Ron Magen
Backyard Boatshop

"Garland Gray II" wrote in message
news:MvHbc.674$bh.184@lakeread02...
Ha, I was a little slow to get that one!
I always used ss until I saw what it does to galvanized chain.
I had never seen a black plastic one until a few hours ago! A
friend
had
bought an anchor line on ebay, and I noticed it in his truck. Only
id
was
Taiwan, but was a nice thimble w/ straps.

"Keith" wrote in message
...
Doing a lot of sewing?

Why not SS? I don't think I've ever seen a black plastic one,
but it
would
be a good idea. Would be cheaper for the mfg's as well.

--


Keith
__
Some people are like Slinkies: not really good for anything,
but
you still can't help but smile when you see one tumble down the
stairs.
"Garland Gray II" wrote in message
news:nrobc.59$bh.45@lakeread02...
Are these available? It's easy to find white or translucent
thimbles,
but
uv
eats them up so badly.
TIA
Garland