Ok guys and gals what about lavac heads?

"Keith" wrote in message
...
Peggie would probably recommend the Raritan Alantes. As for the tank, try
Ronco Plastics and get the biggest one you can fit!
http://www.ronco-plastics.com/. Have them fit a 1" vent fitting, and have
all the penetrations go through the top if possible. I have two pumpout
fittings with dip tubes that go to about 1/2" of the bottom. One goes to
the
deck pumpout and the other to the Sealand T series diapharagm pump. That
way
you don't need a Y valve. I'd suggest using nothing but Sealand Odorsafe
hose.

--


Keith
__
A Freudian slip is when you say one thing but mean your mother.
" wrote in message
news:urVac.152149$1p.1967858@attbi_s54...
I have been reading through all the head options but just got back from
an
extended trip so we may have missed a few recommendations.

We removed an "ancient" head at the end of the season and need to get
going
on a replacement. We own a cruiser docked on Lake Michigan. We plan to
do
some extended cruising in the great lakes this year.

Do you have a suggestion on non-manual replacement? Currently, there is
no
holding tank in the bilges so we'll need to add one(any suggestions as
to
size -- we have plenty of bilge space)? We also have pressurized fresh
water
available in the head space. We'll have someone install what we need and
our
budget (not including installation costs) is $2k max.

Thank you.