View Single Post
  #30   Report Post  
posted to rec.boats
Jack. Jack. is offline
external usenet poster
 
First recorded activity by BoatBanter: Nov 2010
Posts: 143
Default I suspect "cabin fever" is to blame

On Jan 17, 10:24*pm, "Califbill" wrote:
"Jack." *wrote in message

...

On Jan 17, 6:39 pm, "Califbill" wrote:





"I am Tosk" *wrote in
l-september.org...


In article cee50221-872b-450d-a446-9c59166b96d2@
29g2000yqq.googlegroups.com, says...


On Jan 16, 1:26 pm, Harryk wrote:
The manual is silent on how much you open the gas valve on the tank.. I
opened it all the way and then shut it off when the "test" was
finished.


You should always open the valve all the way on an LP tank. *They are
designed with a "back-seat", which seals the valve stem when openend.
If you partially open it, gas can leak from the stem.


Wow, I did not know that.. I never seat anything unless I need to.


--
Rowdy Mouse Racing - Pain is temporary, Glory is forever!


Reply:
TOTALLY WRONG!!!! *Crack the valve about 1/4 turn. *Same with all
flammable
gas cylinders. *O2, Argon etc. that are high pressure and inert have back
seals. *You want to be able to turn the tank off quickly if there is a
leak
or fire. *Take any welding class and you will learn about gas safety.
Propane is a lot safer than a lot of the flammable gas as it is a liquid
under pressure and therefore is at a lot lower pressure in the tank.
Acetylene is a higher pressure in the tank but is in solution in acetone
(I
think that is the liquid) as acetylene will self ignite explosively at a
fairly low pressure.


From the Weber website:

Cart Based Models
* Close the LP tank valve
* Turn all burner control knobs to the OFF position
* Open the grill lid
* Turn the LP tank valve until it is completely open
* Wait several seconds
* Turn the front burner to the HI/Start position
* Press the igniter until the burner is lit.
* Turn remaining burners to High
* Close the lid.
* The grill should preheat to 500-550 degrees in 10-15 minutes

As you point out, LP is not the same as acetylene.

Reply:
Is still a flammable gas. *What happens if you get a bad hose, valve, etc.
You want to turn it off quickly. *Not making 10 turns on a valve that may be
near the fire.


If you don't fully open and back-seat it, the fire may be at the valve
stem itself.