Floor varnish
On 02/01/2011 15:43, Farmer Giles wrote:
Three or four years back I put down a solid oak floor in our lounge, after
sanding it down I finished it with water-based polyurethane floor varnish
from either Screwfix or Toolstation. This was fine until about a year ago
when the surface became badly worn in places. It's a bit of a mess now, and
I'm going to have to sand it down again and re-varnish. Anyone got any
recommendations on the best varnish to use - or any tips on applying it?
The _best_ varnish is going to be a two-pot yacht varnish. The real
stuff, not the kind you buy from a DIY shed. However you may not like
the price.
Ideally you sand to bare wood, then apply West Systems Epoxy or similar
as an undercoat, then a couple of coats of two-pot varnish on top.
x-posted...
Andy
|