BoatBanter.com - View Single Post

Secular Humoresque[_2_]

In article ,
says...

"Secular Humouresque" wrote in message
m...
On 10/18/10 11:42 AM, I am Tosk wrote:
In ,
says...

In article5ec1000e-5b96-49b5-9d59-aec530000d01
@j2g2000yqf.googlegroups.com, says...

On Oct 18, 10:34 am, I am
wrote:
In article190a4303-33b5-4222-91f5-ab7637f2e654
@j18g2000yqd.googlegroups.com, says...

Took the Tolman to Lake Iamonia near Tallahassee yesterday just to
explore its miles of "paths" through the lilypads. Obviously other
boats follow these paths because they are generally clear of weeds.
However, it is not good territory for the Tolman even though the boat
is built for extreme small draft. Repeatedly bogged down the motor
with balls of weeds on the prop and overheating.
So, what is the technique in places like this? Is it just not a good
place for a 90 hp motor? Unfortunately, I had locked the 9.8 kicker
in the "up" position and had forgotten to take its key so I could not
use it.
I really wanted to explore but was afraid of getting stuck and the
motor failing. Swimming or walking back is out of the question as
this place is gator paradise. Passed numerous gator wallows and saw
several gators from a distance.
So, are places like this only for john boats with tiny motors (OK,
airboats too)?

Poling? How heavy is the Tolman, I forget what they look like, how big
they are?

--
Can you imagine being the first President since President Carter, to
be
compared to President Carter?

Been trying to find a suitable pole for that purpose, maybe a piece of
2" diameter bamboo but cannot find any. Might consider using the mast
from my daughters old sailboard. The Tolman is a big boat but
lightweight and would pole easily.

That's what I was thinking... How about making one of some kind of
laminate?

Oh, just had a thought.. What about a banister from Home Depot... Maybe
wrap a sheet of glass around it to keep it from splintering. I think
they are made of cheap soft wood but might be light enough and about the
right size...

Yeah, there can't be more than what, a dozen, manufacturers of push poles
for boats. But, of course, Froggy likes to build it cheap and crappy,
something he has in common with you.

I used a 12' push pole with my SeaPro when I lived in Florida. It was
fiberglass, springy, and worked properly. It was about $125 back then.

But I have to admit, it wouldn't compete with a bannister from Home Depot.

~~ Snerk ~~
That freak is one of a kind!

Thanks for stuffing your nose up my ass at every post I make, little
buddy!