Thanks to all... starter problem solved
"W1TEF" wrote in message
...
On Thu, 8 Jul 2010 22:37:46 -0300, "YukonBound"
wrote:
The wire runs through a channel half way up a semi v hull.
No wire right at the very bottom, where water will collect first.
I'd need about 8" of water to cover the wire in the forward section of the
boat... not so much back in the flatter aft section.
I would have sworn on a stack of Bibles that I used single strand
cable for that. So I got to wondering about it and took at look at
the "junk" box in the barn.
HAH!! For some reason I can't remember, I switched cable from single
strand to stranded because I found the single strand cable I bought
from Agway.
Must be getting old. :)
Beats the alternative... ;-)
|